Hi
Im running Gentoo and Im trying to use kexec to start up OpenBSD. I've
got it set up correct because I can do a boot into Gentoo. Here is what
happens:
base ~ # kexec -l /boot/bsd --type="elf-x86"
Base address: d0200120 is not page aligned
Does anybody know what is going on?
Is there another way besides kexec to do a warm reboot from one kernel
into the next? Id prefer to boot from an OpenBSD into another OpenBSD,
but if that isnt possible than getting kexec working would be acceptable.
Any help is greatly appreciated.
Computer info attached.
Jonathan Steel
base ~ # lspci -v
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 01)
Subsystem: VMware Inc virtualHW v3
Flags: bus master, medium devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
Subsystem: VMware Inc virtualHW v3
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev
01) (prog-if 8a [Master SecP PriP])
Subsystem: VMware Inc virtualHW v3
Flags: bus master, medium devsel, latency 64
I/O ports at 1050 [size=16]
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
Subsystem: VMware Inc virtualHW v3
Flags: medium devsel, IRQ 9
00:0f.0 VGA compatible controller: VMware Inc [VMware SVGA II] PCI
Display Adapter (prog-if 00 [VGA])
Subsystem: VMware Inc [VMware SVGA II] PCI Display Adapter
Flags: medium devsel
I/O ports at 1060 [size=16]
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 10010000 [disabled] [size=32K]
00:10.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970
[PCnet32 LANCE] (rev 10)
Subsystem: Advanced Micro Devices [AMD] PCnet - Fast 79C971
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at 1080 [size=128]
[virtual] Expansion ROM at 10000000 [disabled] [size=64K]
base ~ # cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 8
cpu MHz : 2999.762
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht constant_tsc
pni ds_cpl
bogomips : 1622.01
base ~ # df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda3 3853568 1983300 1674516 55% /
udev 31096 108 30988 1% /dev
none 31096 0 31096 0% /dev/shm
/dev/hda1 16095 14133 1131 93% /boot
_______________________________________________
fastboot mailing list
[email protected]
https://lists.linux-foundation.org/mailman/listinfo/fastboot
