On date Tuesday 2024-03-26 16:47:38 +0000, ffmpeg-devel Mailing List wrote:
> Signed-off-by: Antoine Soulier <asoul...@google.com>
> Signed-off-by: Antoine SOULIER <asoul...@google.com>
> ---
> doc/encoders.texi | 57 +++++++++++++++++++++++++++++++++++++++
> doc/general_contents.texi | 12 ++++++++-
> doc/muxers.texi | 4 +++
> 3 files changed, 72 insertions(+), 1 deletion(-)
>
> diff --git a/doc/encoders.texi b/doc/encoders.texi
> index 7c223ed74c..0719ba13cc 100644
> --- a/doc/encoders.texi
> +++ b/doc/encoders.texi
> @@ -814,6 +814,63 @@ ffmpeg -i input.wav -c:a libfdk_aac -profile:a aac_he
> -b:a 64k output.m4a
> @end example
> @end itemize
>
> +@anchor{liblc3-enc}
> +@section liblc3
> +
> +liblc3 LC3 (Low Complexity Communication Codec) encoder wrapper.
> +
> +Requires the presence of the liblc3 headers and library during configuration.
> +You need to explicitly configure the build with @code{--enable-liblc3}.
> +
> +This encoder has support for the Bluetooth SIG LC3 codec for the LE Audio
> +protocol, and the following features of LC3plus:
> +@itemize @minus
> +@item
> +Frame duration of 2.5 and 5ms.
> +@item
> +High-Resolution mode, 48 KHz, and 96 kHz sampling rates.
> +@end itemize
> +
> +For more information see the liblc3 project at
> +@url{https://github.com/google/liblc3}.
> +
> +@subsection Options
> +
> +The following options are mapped on the shared FFmpeg codec options.
> +
> +@table @option
> +@item b
> +Set the bit rate in bits/s. This will determine the fixed size of the encoded
> +frames, for a selected frame duration.
> +
> +@item ar
> +Set the audio sampling rate (in Hz).
> +
> +@item channels
> +Set the number of audio channels.
> +
> +@item frame_duration
> +Set the audio frame duration in milliseconds. Default value is 10ms.
> +Allowed frame durations are 2.5ms, 5ms, 7.5ms and 10ms.
> +LC3 (Bluetooth LE Audio), allows 7.5ms and 10ms; and LC3plus 2.5ms, 5ms
> +and 10ms.
> +
> +The 10ms frame duration is available in LC3 and LC3 plus standard.
> +In this mode, the produced bitstream can be referenced either as LC3 or
> LC3plus.
> +
> +@item high_resolution
> +Enable the high-resolution mode if set to 1. The high-resolution mode is
> +available with all LC3plus frame durations and for a sampling rate 48 KHz,
> +and 96 KHz.
> +
> +The encoder automatically turns off this mode at lower sampling rates and
> +activates it at 96 KHz.
> +
> +This mode should be preferred at high bitrates. In this mode, the audio
> +bandwidth is always up to the Nyquist frequency, compared to LC3 at 48 KHz,
> +which limits the bandwidth to 20 KHz.
> +@end table
> +
> @anchor{libmp3lame}
> @section libmp3lame
>
> diff --git a/doc/general_contents.texi b/doc/general_contents.texi
> index f269cbd1a9..9e340fce7b 100644
> --- a/doc/general_contents.texi
> +++ b/doc/general_contents.texi
> @@ -237,6 +237,14 @@ Go to
> @url{http://sourceforge.net/projects/opencore-amr/} and follow the
> instructions for installing the library.
> Then pass @code{--enable-libfdk-aac} to configure to enable it.
>
> +@subsection LC3 library
> +
> +FFmpeg can make use of the Google LC3 library for LC3 decoding & encoding.
> +
> +Go to @url{https://github.com/google/liblc3/} and follow the instructions for
> +installing the library.
> +Then pass @code{--enable-liblc3} to configure to enable it.
> +
> @section OpenH264
>
> FFmpeg can make use of the OpenH264 library for H.264 decoding and encoding.
> @@ -1300,7 +1308,9 @@ following image formats are supported:
> @tab encoding and decoding supported through external library libilbc
> @item IMC (Intel Music Coder) @tab @tab X
> @item Interplay ACM @tab @tab X
> -@item MACE (Macintosh Audio Compression/Expansion) 3:1 @tab @tab X
> +@item LC3 @tab E @tab E
> + @tab supported through external library liblc3
> +@item LC3plus @tab E @tab E
> @item MACE (Macintosh Audio Compression/Expansion) 6:1 @tab @tab X
> @item Marian's A-pac audio @tab @tab X
> @item MI-SC4 (Micronas SC-4 Audio) @tab @tab X
> diff --git a/doc/muxers.texi b/doc/muxers.texi
> index d9dd72e613..43dabe4499 100644
> --- a/doc/muxers.texi
> +++ b/doc/muxers.texi
> @@ -132,6 +132,10 @@ to Annex B syntax if it's in length-prefixed mode.
> ITU-T H.265 / MPEG-H Part 2 HEVC video. Bitstream shall be converted
> to Annex B syntax if it's in length-prefixed mode.
>
> +@item lc3 @emph{audio} (lc3)
> +Bluetooth SIG Low Complexity Communication Codec audio.
> +ETSI TS 103 634 Low Complexity Communication Codec plus (LC3plus).
technically this is not a raw muxer, so it should stand in a dedicated section
[...]
Should be good othetwise.
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
