On 23.09.2009 18:48, ron minnich wrote: > did you run the flashrom -v command I suggested. It is possible that > your flash is actually undamaged. >
This was a case of a missing board enable, and the flash chip did not conform to its own datasheet: The area covered by TBL# was 128 kB (instead of 64 kB as claimed in the datasheet) and TBL# was completely ignored if you used 4 kB sector erase instead of 64 kB block erase. Luc and I debugged and fixed this and the machine is working fine. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom
