Hello,
I request your help for a little problem.
I try to unbrick my MSI Gaming 5 Z97 motherboard, using flashrom using a
raspberry Pi 4b vi the JSPI1 port.
I plugged it like this :
Hold 0V o o WP 3.3V
x o
o o GND
CLK o o CS
SI-SO o o SO-SI
o o VCC
The plugin seems to be good as Flashrom detects the chipset as a Winbond
W25Q64.V
The battery of the mother board is removed, no other external current
source plugged.
When I launch the writing sequence everything goes flawlessly and the
problem appears during the flash verification. I receive this message :
Verifying flash... FAILED at 0x00000014! Expected=0x03, Found=0x02, failed
byte count from 0x00000000-0x007fffff: 0x3d6c96
Your flash chip is in an unknown state.
I tried to put HOLD at 3.3V and let the CMOS battery but it is always the
same message.
Maybe my chipset has an internal defect ? If yes, I think I can buy a new
chip and solder it but it's a brutal solution ;)
I would really be pleased if you could give me at least a clue.
Best regards
Guillaume RALLON
The whole messages are below :
flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=512 -w
/home/Yogiadmin/flashrom/E7917IMS.190
flashrom v1.2-644-g79e2bd0 on Linux 5.10.92-v8+ (aarch64)
flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000014! Expected=0x03, Found=0x02, failed
byte count from 0x00000000-0x007fffff: 0x3d6c96
Your flash chip is in an unknown state.
Please report this to the mailing list at flashrom@flashrom.org or
on IRC (see https://www.flashrom.org/Contact for details), thanks!
--
RALLON Guillaume
19 CHEMIN DE LA RETARDIERE
44700 ORVAULT
FRANCE
06 79 69 15 60
_______________________________________________
flashrom mailing list -- flashrom@flashrom.org
To unsubscribe send an email to flashrom-le...@flashrom.org
