It might possibly show up on the scope function of the panadaptor
panel. Several of us had a pulse affecting RTTY tx a few versions
back, and it showed clearly on the 5000a scope function.
Jerry W4UK
At 07:32 PM 3/2/2011, Richard W. Solomon wrote:
A fast Storage Scope would be better, the pulse, which only occurs when
the T/R circuit is activated, would be quite fast.
73, Dick, W1KSZ
-----Original Message-----
>From: Brian Lloyd <brian-wb6...@lloyd.com>
>Sent: Mar 2, 2011 4:23 PM
>To: manual...@juno.com
>Cc: flexradio@flex-radio.biz
>Subject: Re: [Flexradio] FLEX5K Drops Amplifier
>
>On Wed, Mar 2, 2011 at 2:51 PM, <manual...@juno.com> wrote:
>
>> Connect an RF sensor(connected to a fast scope) to the cable between the
>> 5000 and the Acom and see if you can catch it in action.
>>
>
>I have a station monitor. Right now I have it attached to the 3000 at school
>but can bring it home and check out the 5000 tonight.
>
>--
>Brian Lloyd, WB6RQN/J79BPL
>3191 Western Dr.
>Cameron Park, CA 95682
>br...@lloyd.com
>+1.767.617.1365 (Dominica)
>+1.931.492.6776 (USA)
>(+1.931.4.WB6RQN)
>_______________________________________________
>FlexRadio Systems Mailing List
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>Knowledge Base: http://kc.flexradio.com/ Homepage:
http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
