PowerSDR has provides to methods of recording. One is to use the REC PLAY buttons on the radio graphics. It will record and playback the frequency you are recording. There is a Wave tab where one can record audio or IQ. IQ allows one to play back the spectrum monitored. It works very well. Jim, K6QE
> From: flexradio-requ...@flex-radio.biz > Subject: FlexRadio Digest, Vol 102, Issue 14 > To: flexradio@flex-radio.biz > Date: Wed, 16 Oct 2013 12:00:01 -0500 > > Send FlexRadio mailing list submissions to > flexradio@flex-radio.biz > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > or, via email, send a message with subject or body 'help' to > flexradio-requ...@flex-radio.biz > > You can reach the person managing the list at > flexradio-ow...@flex-radio.biz > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of FlexRadio digest..." > > > Today's Topics: > > 1. Software for desktop recording? (Bernd Schnell) > 2. unsubscribe (ssb) > 3. Re: Software for desktop recording? (Goran ANDRIC, S55OO) > 4. Interfacing VHF/UHF and Microwave Transverters to Flex 5000 > (Bill Tynan) > 5. Re: Interfacing VHF/UHF and Microwave Transverters to Flex > 5000 (WP4O) > 6. Re: Interfacing VHF/UHF and Microwave Transverters to Flex > 5000 (Kjeld B?low Thomsen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 15 Oct 2013 21:19:27 +0200 > From: Bernd Schnell <dl9...@gmx.de> > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] Software for desktop recording? > Message-ID: <525d953f.4020...@gmx.de> > Content-Type: text/plain; charset=ISO-8859-15; format=flowed > > Hello, > > I am looking for a software (freeware prefered, win7) to record my > desktop while running my SDR. > > Any suggestions? > > Bernd - DL9UAS > > > > > ------------------------------ > > Message: 2 > Date: Fri, 11 Oct 2013 19:01:35 +0200 > From: ssb <s...@hot.pl> > To: flexradio@flex-radio.biz > Subject: [Flexradio] unsubscribe > Message-ID: <3703c2c7-fa72-4d10-8e71-37d08bde7...@hot.pl> > Content-Type: text/plain > > > > > ------------------------------ > > Message: 3 > Date: Tue, 15 Oct 2013 22:20:00 +0200 > From: "Goran ANDRIC, S55OO" <goran.and...@guest.arnes.si> > To: Bernd Schnell <dl9...@gmx.de> > Cc: "flexradio@flex-radio.biz" <FlexRadio@flex-radio.biz> > Subject: Re: [Flexradio] Software for desktop recording? > Message-ID: > <CAO_vvQx6i5Yaq53f68FLYayZAYr5GYjAW-WKsq-oS++=874...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I am using http://camstudio.org/ . > > 73GL > Dne 15. okt. 2013 21:19 je oseba "Bernd Schnell" <dl9...@gmx.de> napisala: > > > Hello, > > > > I am looking for a software (freeware prefered, win7) to record my desktop > > while running my SDR. > > > > Any suggestions? > > > > Bernd - DL9UAS > > > > > > ______________________________**_________________ > > FlexRadio Systems Mailing List > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz> > > Archives: > > http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/> > > Knowledge Base: http://kc.flexradio.com/ Homepage: > > http://www.flexradio.com/ > > > > > ------------------------------ > > Message: 4 > Date: Tue, 15 Oct 2013 15:32:10 -0500 > From: "Bill Tynan" <billandmat...@windstream.net> > To: "flexradio@flex-radio.biz" <FlexRadio@flex-radio.biz> > Subject: [Flexradio] Interfacing VHF/UHF and Microwave Transverters to > Flex 5000 > Message-ID: <D452C62EC253402580B2A7FD9E26B1E0@MAIN> > Content-Type: text/plain; charset="iso-8859-1" > > HELP! > > I want to be able to interface 7 transverters to my Flex 5K. > > I have the following transverters: > 1. DEMI 222 MHz 28 MHz input (in shack) > 2. DEMI 1296 MHz 28 MHz Input (in shack) > 3. Old Microwave Modules 144 MHz 28 MHz input (in shack) > 4 DEMI 902 MHz 144 MHz input (in shack) > 5 DEMI 2304 MHz 144 MHz Input (on tower) > 6 DEMI 3456 MHz 144 MHz input (on tower) > 7 DEMI 10 GHz 144 MHz Input (to be on tower in the future) > > I have come up with a switching scheme which utilizes a 6 Position 3 Deck > switch. > > Position 1 Deck 1 goes to the coil of a coax relay which connects the 5K 28 > MHz transverter output to the 222 MHz transverter. Deck 2 is Open. Deck 3 > connects the Yellow PTT line on the Flex 5K to the 222 MHz PTT input. The > Red and White PTT lines are in use to key 6 and 2 meter amps.) > > Position 2 Deck 1 goes to a the coil of a coax relay which connects the 5K 28 > MHz transverter output to the 1296 MHz transverter. Deck 2 is Open. Deck 3 > connects the Yellow PTT line on the Flex 5K to the PTT input on the 1296 MHz > transverter. > > Positions 3, 4, 5, and 6 of Deck 1 go to the coil of a coax relay which > connects the 5K 28 MHz transverter output to the Microwave Modules 144 MHz > transverter. Deck 2 goes to a coax relay which connects the output of the 144 > Microwave Module transverter to the 902 MHz transverter. Deck 3 connects the > Yellow PTT line on the Flex 5K to the PTT input on the Microwave Modules 144 > MHz MHz transverter. > > Position 4 (Deck 1 See Above) Deck 2 goes to a coax relay which connects the > output of the 144 Microwave Module transverter to the 2304 MHz transverter. > Deck 3 connects the Yellow PTT line on the Flex 5K to the PTT input on the > Microwave Modules 144 MHz MHz transverter. > > Position 5 (Deck 1 See Above) Deck 2 goes to a coax relay which connects the > output of the 144 Microwave Module transverter to the 3456 MHz transverter. > Deck 3 connects the Yellow PTT line on the Flex 5K to the PTT input on the > Microwave Modules 144 MHz MHz transverter. > > Position 6 (Deck 1 See Above) Deck 2 goes to a coax relay which connects the > output of the 144 Microwave Module transverter to the 10 GHz transverter. > Deck 3 connects the Yellow PTT line on the Flex 5K to the PTT input on the > Microwave Modules 144 MHz MHz transverter. > > Note: The 902, 2304 and 3456 MHz transverters are RF switched. Haven't > thought about the 10 GHz unit yet. > > Unless I have forgotten something, the above should work. It will require > moving the switch every time I want to change bands. The switch can, of > course be mounted at the operating position. All of the transverters will be > in another room. > > But, it would be nice if I could delete the switch and wonder if there is > some signal I can get out of the Flex 5K that I could use to automatically do > the job of switching the various relay coils. I had hoped that the Flexwire > connector would be of some help, it does not appear to be. Am I missing > something? > > Any help and/or suggestions would be most welcome. > > 73, > > Bill Tynan, W3XO > > > > > ------------------------------ > > Message: 5 > Date: Tue, 15 Oct 2013 18:07:56 -0400 > From: "WP4O" <w...@tampabay.rr.com> > To: "'Bill Tynan'" <billandmat...@windstream.net>, > "'flexradio@flex-radio.biz'" <FlexRadio@flex-radio.biz> > Subject: Re: [Flexradio] Interfacing VHF/UHF and Microwave > Transverters to Flex 5000 > Message-ID: <007b01cec9f3$009e66e0$01db34a0$@tampabay.rr.com> > Content-Type: text/plain; charset="us-ascii" > > Khune makes a great switching box for up to 6 transverters > > Good luck > > > -----Original Message----- > From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bill > Tynan > Sent: Tuesday, October 15, 2013 4:32 PM > To: flexradio@flex-radio.biz > Subject: [Flexradio] Interfacing VHF/UHF and Microwave Transverters to Flex > 5000 > > HELP! > > I want to be able to interface 7 transverters to my Flex 5K. > > I have the following transverters: > 1. DEMI 222 MHz 28 MHz input (in shack) > 2. DEMI 1296 MHz 28 MHz Input (in shack) 3. Old Microwave Modules 144 MHz > 28 MHz input (in shack) > 4 DEMI 902 MHz 144 MHz input (in shack) > 5 DEMI 2304 MHz 144 MHz Input (on tower) > 6 DEMI 3456 MHz 144 MHz input (on tower) > 7 DEMI 10 GHz 144 MHz Input (to be on tower in the future) > > I have come up with a switching scheme which utilizes a 6 Position 3 Deck > switch. > > Position 1 Deck 1 goes to the coil of a coax relay which connects the 5K 28 > MHz transverter output to the 222 MHz transverter. Deck 2 is Open. Deck 3 > connects the Yellow PTT line on the Flex 5K to the 222 MHz PTT input. The > Red and White PTT lines are in use to key 6 and 2 meter amps.) > > Position 2 Deck 1 goes to a the coil of a coax relay which connects the 5K > 28 MHz transverter output to the 1296 MHz transverter. Deck 2 is Open. Deck > 3 connects the Yellow PTT line on the Flex 5K to the PTT input on the 1296 > MHz transverter. > > Positions 3, 4, 5, and 6 of Deck 1 go to the coil of a coax relay which > connects the 5K 28 MHz transverter output to the Microwave Modules 144 MHz > transverter. Deck 2 goes to a coax relay which connects the output of the > 144 Microwave Module transverter to the 902 MHz transverter. Deck 3 connects > the Yellow PTT line on the Flex 5K to the PTT input on the Microwave Modules > 144 MHz MHz transverter. > > Position 4 (Deck 1 See Above) Deck 2 goes to a coax relay which connects the > output of the 144 Microwave Module transverter to the 2304 MHz transverter. > Deck 3 connects the Yellow PTT line on the Flex 5K to the PTT input on the > Microwave Modules 144 MHz MHz transverter. > > Position 5 (Deck 1 See Above) Deck 2 goes to a coax relay which connects > the output of the 144 Microwave Module transverter to the 3456 MHz > transverter. Deck 3 connects the Yellow PTT line on the Flex 5K to the PTT > input on the Microwave Modules 144 MHz MHz transverter. > > Position 6 (Deck 1 See Above) Deck 2 goes to a coax relay which connects > the output of the 144 Microwave Module transverter to the 10 GHz > transverter. Deck 3 connects the Yellow PTT line on the Flex 5K to the PTT > input on the Microwave Modules 144 MHz MHz transverter. > > Note: The 902, 2304 and 3456 MHz transverters are RF switched. Haven't > thought about the 10 GHz unit yet. > > Unless I have forgotten something, the above should work. It will require > moving the switch every time I want to change bands. The switch can, of > course be mounted at the operating position. All of the transverters will be > in another room. > > But, it would be nice if I could delete the switch and wonder if there is > some signal I can get out of the Flex 5K that I could use to automatically > do the job of switching the various relay coils. I had hoped that the > Flexwire connector would be of some help, it does not appear to be. Am I > missing something? > > Any help and/or suggestions would be most welcome. > > 73, > > Bill Tynan, W3XO > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > > > > ------------------------------ > > Message: 6 > Date: Wed, 16 Oct 2013 14:58:31 +0200 > From: Kjeld B?low Thomsen <oz...@mail.dk> > To: <flexradio@flex-radio.biz> > Subject: Re: [Flexradio] Interfacing VHF/UHF and Microwave > Transverters to Flex 5000 > Message-ID: <00bb01ceca6f$6b776350$426629f0$@dk> > Content-Type: text/plain; charset="iso-8859-1" > > It?s easy to switch transverters from PSDR via DDUtil and a LPT-port. If > such a port is not available, switching can be done via the Flexwire ports > I2C bus. K3TUF makes an interface: http://www.k3tuf.com/FW.html. I use both > solutions to switch transverters via a homebrew switchbox based on two > 6-ports SMA relays and DB6NT 144/28 and 432/28 MHz transverter modules. > > > > http://www.oz1ff.dk/images/OZ1FF%20Microwave%20Station.pdf > > > > Vy 73 de OZ1FF - Kjeld > > > > Phone/SMS +45 4021 1119 > > Skype oz1ff-1 > > > > <mailto:kj...@oz1ff.dk> mailto:kj...@oz1ff.dk > > <http://www.oz1ff.dk/> http://www.oz1ff.dk > > > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: > http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ > > ------------------------------ > > End of FlexRadio Digest, Vol 102, Issue 14 > ****************************************** _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
