On Tuesday 26 February 2002 10:16 pm, you wrote: > Andy Ross writes: > > The problem is, typical control setups don't have toe brakes on the > > rudder pedals. So I cheated in the initial configuration and mapped > > the outer (+/- 0.5-1.0) range of the rudder pedals to the brakes. I > > thought this was nifty and clever, but David (who spends a lot more > > time flying it and cares more about the model behavior) didn't like > > it. The DC-3 is his baby, after all. > > Here's something I tried a while back -- rebind whatever you're using > for brakes (I use the two triggers on my gamepad) to increment the > brake by, say, 0.01 rather than setting it to 1.0, and bind the > release event to set it to 0.0. That way, the brakes come on a little > more gradually, and you can pump the button to avoid full brakes. > > If you have some spare joystick axes, they'd work great for the brakes. > > > All the best, > > > David
Hey David, I was thinking of getting another controller, what was that one you recommended? _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel