pls. check DIP Switches or jumper on your CD Drive - "Block Size" an "Test" must be OFF!!! Claus Zaspel Customer Service Duesseldorf Foxboro Deutschland GmbH Heerdter Lohweg 53 - 56 40549 Duesseldorf Tel.: +49 (0)211 5966-418 +49 (0)2133 55-7252 Fax: +49 (0)211 5966-430 +49 (0)2133 55-7470 E-Mail: [EMAIL PROTECTED] [EMAIL PROTECTED] http://www.foxboro-deutschland.de -----Ursprüngliche Nachricht----- Von: Ganesh Karthik [mailto:[EMAIL PROTECTED]] Gesendet: Dienstag, 7. November 2000 18:27 An: Foxboro DCS Mail List Betreff: Version 6.2 day 0 on a Sun Ultra 60 I'm trying to do a I/A Version 6.2 day 0 on a Sun Ultra 60, which has 18GB HDD(internal). I'm unable to boot it with CDROM, whenever i give a boot cdrom, i encounter this error message Resetting scsi bus data overrun; too much data on target 6 I tried with the Pre-install diskette P/N K0175SN-E, we are unable to load it as i'm unable to boot it using CDROM. But, i'm able to install a Solaris 7 on the same box. Can somebody pls provide some information on how to do a day 0 for the Ultra 60 with 18GB HDD. thanks & regards Ganesh Karthik J ----------------------------------------------------------------------- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with "unsubscribe foxboro" in the Subject. Or, send any mail to [EMAIL PROTECTED] ----------------------------------------------------------------------- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with "unsubscribe foxboro" in the Subject. Or, send any mail to [EMAIL PROTECTED]