I sent this yesterday but it still hasn't shown up here yet so I'll try again. Apologies if anyone receives it twice. Dave
On Fri, 7 Dec 2007 19:55:12 +0100 (CET), Tomas Hajny wrote: > Dave Parsons wrote: > > On Fri, 07 Dec 2007 12:12:53 +0100, Vincent Snijders wrote: > >> Dave Parsons schreef: > > > Hi, > > >> > I've just tried building fpc-2.3.1 from svn using fpc-2.0.4 and > >> > received the following errors. > > > >> Can you start with fpc-2.2.0? > > > > No, according to the FPC download page 2.0.4 is the latest. > > I've been trying to build from svn for a while now but it > > didn't build until about 2 months ago & that was 2.3.1. > > Correct. Nevertheless, there are binary snapshots available for both 2.2.1 > and 2.3.1; building with either of them should probably work (2.2.1 is > preferred). Well, I found and tried the files from here:- ftp://ftp.freepascal.org/pub/fpc/snapshot/v22/i386-os2 and now have another problem:- < a couple of hundred similar lines cut > ..\..\rtl\units\os2\system.s:1075: Error: no such 386 instruction: `movups' ..\..\rtl\units\os2\system.s:1975: Error: no such 386 instruction: `ldmxcsr' ..\..\rtl\units\os2\system.s:2022: Error: no such 386 instruction: `movaps' ..\..\rtl\units\os2\system.s:4418: Error: no such 386 instruction: `ldmxcsr' ..\..\rtl\units\os2\system.s:4429: Error: no such 386 instruction: `stmxcsr' system.pas(1208) Error: Error while assembling exitcode 1 So far I've tried regenerating the makefiles and changing fpc.cfg but no change. I noticed a difference in the -O options but it seems to ignore any changes I make in fpc.cfg, or they are overridden later. For 2.0.4 I have -OG2p3 but with 2.2.1 I have only -O2. Any ideas? Dave _______________________________________________ fpc-devel maillist - [email protected] http://lists.freepascal.org/mailman/listinfo/fpc-devel
