> > 20060428: > > The puc(4) driver has been overhauled. The ebus(4) and sbus(4) > > attachments have been removed. Make sure to configure scc(4) > > on sparc64. Note also that by default puc(4) will use uart(4) > > and not sio(4) for serial ports because interrupt handling has > > been optimized for multi-port serial cards and only uart(4) > > implements the interface to support it. > > Does the puc driver now obsoletes sio as it's going to use uart instead?
# dmesg -a | egrep 'uart|puc' puc0: <Dolphin Peripherals 4036> port 0x2000-0x201f irq 10 at device 14.0 on pci0 uart0: <16550 or compatible> on puc0 uart1: <16550 or compatible> on puc0 uart2: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0 uart3: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 # I have "nodevice sio" in my kernel config and kldloaded puc.ko and uart.ko. Helge _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
