----- Original Message -----
From: "George Kontostanos" <gkontos.m...@gmail.com>
I know. The problem with that controller is that for some reason it
doesn't like gpart. I have gnoped the drives directly and it seems to
be working so far.
It still really smells like something higher up the layers than the
controller tbh.
In addition to this we're running LSI 2008 based controllers here on
8.2-RELEASE + manually merged in mps driver with ZFS just fine. They
aren't running 4k aligned but they are working well.
Right, they fall under the mps driver like the following:
LSI Logic SAS2004 (4 Port SAS)
LSI Logic SAS2008 (8 Port SAS)
LSI Logic SAS2108 (8 Port SAS)
LSI Logic SAS2116 (16 Port SAS)
LSI Logic SAS2208 (8 Port SAS)
Confused as your 9240-4i is a SAS2008 based card so you "shouldnt" be
seeing any difference as it should be supported just fine under mps.
The cards we have here are 9211-8i if that helps.
Regards
Steve
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it.
In the event of misdirection, illegible or incomplete transmission please
telephone +44 845 868 1337
or return the E.mail to postmas...@multiplay.co.uk.
_______________________________________________
freebsd-hardware@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"
