Vince Hoffman wrote:
This may sound silly but if performance is that bad have you checked if you have a Duplex mismatch ? (one side set to full manually and the other to auto commonly results in duplex mismatches in my experience. (see http://www.cites.uiuc.edu/network/autosense.html or use google for more info)
Hm, my switch isn't manageable, so it can't be set manually to full-duplex and must be using autosense.
As for the card: > ifconfig vr0
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.1.2.125 netmask 0xff000000 broadcast 10.255.255.255 inet6 fe80::213:d4ff:fecc:a6a2%vr0 prefixlen 64 scopeid 0x1 ether 00:13:d4:cc:a6:a2 media: Ethernet autoselect (100baseTX <full-duplex>) status: active
This was configured through rc.conf with: > ifconfig_vr0="DHCP" So I guess this is not the problem. bye & Thanks anyway av. _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"