I'm having trouble getting mpd 4.1 going, and am a netgraph noobie.
FreeBSD paqi.nimnet.asn.au 5.5-STABLE FreeBSD 5.5-STABLE #0: Sat Mar 3
03:14:13 EST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/PAQI5S_3 i386
paqi# mpd4 -v
Version 4.1 ([EMAIL PROTECTED] 20:51 3-Mar-2007)
/etc/rc.conf (updated since rebooting after installworld) has:
mpd_enable="YES"
mpd_flags="-b"
When started the first time, before there's any ng0 interface, mpd logs
the following two lines then immediately exits without further ado:
paqi# /usr/local/etc/rc.d/mpd4.sh start
Starting mpd4.
/var/log/mpd.log:
[.. previous attempts with mpd4.1-rc2 on a 5.5-STABLE from December,
with exactly the same set of symptoms as now
..]
Mar 3 23:25:18 paqi mpd: process 36762 started, version 4.1 ([EMAIL PROTECTED]
20:51 3-Mar-2007)
Mar 3 23:25:18 paqi mpd: CONSOLE: listening on 127.0.0.1 5005
paqi# ps aux | grep "[m]pd"
paqi# sockstat | grep mpd
Having been exactly here before with rc2, I see ng0 has been created:
paqi# ifconfig
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
dc0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 192.168.7.1 netmask 0xffffff00 broadcast 192.168.7.255
ether 00:14:6c:8e:ef:37
media: Ethernet 100baseTX <full-duplex>
status: active
xe0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:80:c7:ea:cb:c5
media: Ethernet 10baseT/UTP
status: active
ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
and know that it'll refer to the now-dead PID 36762 from above:
paqi# ngctl list
There are 5 total nodes:
Name: ngctl36785 Type: socket ID: 00000006 Num hooks: 0
Name: mpd36762-PPPoE-bpf Type: bpf ID: 00000005 Num hooks: 2
Name: mpd36762-PPPoE-vjc Type: vjc ID: 00000004 Num hooks: 4
Name: mpd36762-PPPoE Type: ppp ID: 00000003 Num hooks: 6
Name: ng0 Type: iface ID: 00000002 Num hooks: 2
paqi# ngctl list -l
There are 5 total nodes:
Name: ngctl36786 Type: socket ID: 00000007 Num hooks: 0
Name: mpd36762-PPPoE-bpf Type: bpf ID: 00000005 Num hooks: 2
Local hook Peer name Peer type Peer ID Peer hook
---------- --------- --------- ------- ---------
iface ng0 iface 00000002 inet
ppp mpd36762-PPPoE ppp 00000003 inet
Name: mpd36762-PPPoE-vjc Type: vjc ID: 00000004 Num hooks: 4
Local hook Peer name Peer type Peer ID Peer hook
---------- --------- --------- ------- ---------
vjip mpd36762-PPPoE ppp 00000003 vjc_vjip
vjuncomp mpd36762-PPPoE ppp 00000003 vjc_vjuncomp
vjcomp mpd36762-PPPoE ppp 00000003 vjc_vjcomp
ip mpd36762-PPPoE ppp 00000003 vjc_ip
Name: mpd36762-PPPoE Type: ppp ID: 00000003 Num hooks: 6
Local hook Peer name Peer type Peer ID Peer hook
---------- --------- --------- ------- ---------
ipv6 ng0 iface 00000002 inet6
inet mpd36762-PPPoE-bpf bpf 00000005 ppp
vjc_vjip mpd36762-PPPoE-vjc vjc 00000004 vjip
vjc_vjuncomp mpd36762-PPPoE-vjc vjc 00000004 vjuncomp
vjc_vjcomp mpd36762-PPPoE-vjc vjc 00000004 vjcomp
vjc_ip mpd36762-PPPoE-vjc vjc 00000004 ip
Name: ng0 Type: iface ID: 00000002 Num hooks: 2
Local hook Peer name Peer type Peer ID Peer hook
---------- --------- --------- ------- ---------
inet6 mpd36762-PPPoE ppp 00000003 ipv6
inet mpd36762-PPPoE-bpf bpf 00000005 iface
'ifconfig ng0 destroy' won't. So then, now mpd will start, uselessly:
paqi# /usr/local/etc/rc.d/mpd4.sh start
Starting mpd4.
paqi# ps auxww | grep "[m]pd"
root 36794 0.0 1.5 4040 2268 ?? Is 11:31PM 0:00.02
/usr/local/sbin/mpd4 -p /var/run/mpd4.pid -b
paqi# cat /var/run/mpd4.pid
36794
paqi# sockstat | grep mpd
root mpd4 36794 3 dgram -> /var/run/logpriv
root mpd4 36794 10 tcp4 127.0.0.1:5005 *:*
Now I can telnet in ok, but it's 'no bundles defined' all the way. I
can exit, or quit which stops mpd ok (but leaves ng0 as is), but this
time my poking around also found that 'show iface' murdered it:
Mar 3 23:31:44 paqi mpd: process 36794 started, version 4.1 ([EMAIL PROTECTED]
20:51 3-Mar-2007)
Mar 3 23:31:44 paqi mpd: CONSOLE: listening on 127.0.0.1 5005
Mar 3 23:31:44 paqi mpd: [PPPoE] can't connect "bypass.inet"->"iface" and
"ng0:"->"inet": File exists
Mar 3 23:31:44 paqi mpd: [PPPoE] netgraph initialization failed
Mar 3 23:31:44 paqi mpd: no bundles defined
[obviously the problem, but why?]
Mar 4 01:34:22 paqi mpd: last message repeated 14 times (14 more conf lines)
Mar 4 01:34:22 paqi mpd: CONSOLE: Connect
Mar 4 01:34:22 paqi mpd: CONSOLE: Allocated new console session 0x80d501c from
127.0.0.1
Mar 4 01:34:33 paqi mpd: [(null)] CONSOLE: smithi: log
Mar 4 01:35:40 paqi mpd: [(null)] CONSOLE: smithi: log -ipv6cp
Mar 4 01:35:45 paqi mpd: [(null)] CONSOLE: smithi: log
Mar 4 01:35:54 paqi mpd: [(null)] CONSOLE: smithi: load PPPoE
Mar 4 01:35:54 paqi mpd: [PPPoE] can't connect "bypass.inet"->"iface" and
"ng0:"->"inet": File exists
Mar 4 01:35:54 paqi mpd: [PPPoE] netgraph initialization failed
Mar 4 01:35:54 paqi mpd: no bundles defined
Mar 4 01:36:24 paqi mpd: last message repeated 14 times
Mar 4 01:36:24 paqi mpd: [(null)] CONSOLE: smithi: sho
Mar 4 01:36:40 paqi mpd: [(null)] CONSOLE: smithi: sho ipv6cp
Mar 4 01:36:40 paqi mpd: no bundles defined
Mar 4 01:36:49 paqi mpd: [(null)] CONSOLE: smithi: sho auth
Mar 4 01:36:49 paqi mpd: no bundles defined
Mar 4 01:36:57 paqi mpd: [(null)] CONSOLE: smithi: sho types
Mar 4 01:37:18 paqi mpd: [(null)] CONSOLE: smithi: sho iface
Mar 4 01:37:19 paqi mpd: caught fatal signal segv
Mar 4 01:37:19 paqi mpd: fatal error, exiting
Mar 4 01:37:19 paqi mpd: process 36794 terminated
(no core)
paqi# ngctl list
There are 5 total nodes:
Name: ngctl37232 Type: socket ID: 00000012 Num hooks: 0
Name: mpd36762-PPPoE-bpf Type: bpf ID: 00000005 Num hooks: 2
Name: mpd36762-PPPoE-vjc Type: vjc ID: 00000004 Num hooks: 4
Name: mpd36762-PPPoE Type: ppp ID: 00000003 Num hooks: 6
Name: ng0 Type: iface ID: 00000002 Num hooks: 2
mpd.conf less comments (yes, with no empty lines between)
startup:
set console port 5005
set console ip 127.0.0.1
set console user smithi xxxxx
set console user root xxxxxxx
set console open
default:
load PPPoE
PPPoE:
new -i ng0 PPPoE PPPoE
set iface addrs 1.1.1.1 2.2.2.2
set iface route default
set iface disable on-demand
set iface idle 0
set bundle disable multilink
set auth authname "[EMAIL PROTECTED]"
set auth password "yeahsure"
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set link keep-alive 10 60
set ipcp yes vjcomp
set ipcp ranges w.x.y.z/0 w.x.0.0/16
open
mpd.links likewise:
PPPoE:
set link type pppoe
set pppoe iface xe0
set pppoe service ""
set pppoe disable incoming
set pppoe enable originate
NETGRAPH is in kernel, modules are loaded:
paqi# kldstat -v | egrep "net|ng_"
161 netgraph
163 dummynet
4 1 0xc227a000 4000 ng_socket.ko
239 ng_socket
5 1 0xc227e000 3000 ng_iface.ko
240 ng_iface
6 1 0xc2281000 6000 ng_ppp.ko
241 ng_ppp
7 1 0xc2287000 4000 ng_vjc.ko
242 ng_vjc
8 1 0xc2296000 4000 ng_bpf.ko
243 ng_bpf
Hmmm, I'm sure I saw ng_pppoe.ko was there too on my attempts with rc2
before, though they had also all come up with exactly the same error:
mpd: [PPPoE] can't connect "bypass.inet"->"iface" and "ng0:"->"inet": File
exists
mpd: [PPPoE] netgraph initialization failed
One thing makes me a bit nervous: those ipv6 and inet6 hooks. kernel is
compiled without INET6, new kernel/world built with make.conf having:
NOINET6=true # do not build IPv6 related programs and libraries
WITHOUT_IPV6=true
Hope that's enough but not too much info.
Cheers, Ian
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
