Manish Vachharajani wrote:
Hmm, what version of FreeBSD are you using? I don't know the solution
but I wonder if it is related to a similar problem we are having with
TCP connection scaling, both under 7.2 and 8.0 over a 10 Gb link.
We've been trying to track it down, and if you see it for UDP as well
that may give some clues.
Well, asfar as I remember the majority of the code path for UDP and TCP is
rather diffent.
And our caseis evenmore special, since we do not do controlflow and thus do
not have packets coming back in over that same interface/ip-nr.
There is almost no state at all.
If you do a netstat -idh what is the output? Does the recieving
interface show any Ierrs or drops? If so, you should be able to do a
sysctl dev.em.<interface number>.stats=1 and then see some output via
dmesg. Does this show any missed packets?
No, errors at all. But I would also be very reluctant to add more logging
since that IS going to impact throughput.
Oh, also, what kind of machine are you running on?
FreeBSD 7.2-STABLE #0: Fri Sep 4 18:01:30 CEST 2009
CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2133.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f2 Stepping = 2
real memory = 1072623616 (1022 MB)
avail memory = 1040248832 (992 MB)
7 * em device over PCI-E
e...@pci0:7:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = '82573L Intel PRO/1000 PL Network Adaptor'
class = network
subclass = ethernet
And Yes the idea is to do something similar over a 10Gb interface.
--WjW
Manish
On Fri, Sep 4, 2009 at 10:28 AM, Willem Jan Withagen<w...@digiware.nl> wrote:
First of: I've been googleing for about a day, but I'll take any suggestions
for more info.
What I'm trying to do is get as much 1440 byte UDP packets out of an em
device. And when tat works, get as much out of the 7 em devices that this
board has. :)
Currently I run into trouble at 250*174 = 43500 packets/sec.
How is the setup:
em0 gets 1 stream of 174 p/s which is ~ 2Mbit
this gets repeated to 250 streams
currently to 2 other servers, 125 streams each.
each on their own 1 Gbit port
This works uptil 123 streams each, going high gives packet loss.
So this is at about 500Mbit/sec on a 1Gbit port
And why do I know that the packetloss is not in the network?
Well there are no errors on
the output interface
the ports on the switch
the input ports on the receivers
the mib of the switch does not show any signs of dropped packets, or
likes.
Also I can change the order of the queing in my repeater, and then the
packetloss moves to the host which is last the outputlist.
I tried raising the socketbuffer " sysctl -w net.inet.udp.maxdgram=184320"
in a few steps. But that did not bring anything.
So my guess is that I'm dropping packets somewhere from the output socket to
the wire.
BTW al stats in systat -vm are close to 0%.
What tunables are there to turn?
And if not tuneable, what parts of the code would be target for closer
inspection.
Any help is more than welcome
--WjW
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
