On Sun, Jan 30, 2011 at 02:53:15PM +0100, Milan Obuch wrote: > On Sunday 30 January 2011 07:40:48 Zeus V Panchenko wrote: > > another detail for this nic > > > > dmidecode > > Base Board Information > > Manufacturer: ASUSTeK Computer INC. > > Product Name: AT5NM10-I > > Version: Rev x.0x > > Serial Number: MT7006K15200322 > > > > I did not followed this thread closely, but I checked my new board and it is > the same. > > > uname -a > > FreeBSD 8.2-PRERELEASE amd64 > > > > system was cvsup-ed 2011.01.20 > > > > if_re.c,v 1.160.2.17 2011/01/15 00:32:15 yongari > > > > dmesg > > rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 > > rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, > > 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, > > 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, > > auto-flow re0: Ethernet address: 20:cf:30:89:5e:95 > > re0: [FILTER] > > > > pciconf -lv > > re0@pci0:2:0:0: class=0x020000 card=0x83a31043 chip=0x816810ec rev=0x03 > > hdr=0x00 vendor = 'Realtek Semiconductor' > > device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)' > > class = network > > subclass = ethernet > > > > All details are the same for my board (modulo serial number and MAC, of > course), and in my case it works with no problem, but only in 100 Mb switch > port. In 1 Gb port I have no link. I must verify my cables, port on switch > itself works just fine with another 1 Gb (intel) card. >
Would you try a patch at the following URL? http://people.freebsd.org/~yongari/re/rgephy.link.patch3 > > > > while connected directly NIC <-> NIC they flaps too > > > > I will try this against another 1 Gb card too, just to see what happens... in > 100 Mb mode it works just fine, as I mentioned already - running flood ping > with 1472 bytes packets for more than an hour I see only four responses > missing in more than 21 millions tries... > > Regards, > Milan _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
