On Sat, 2010-03-13 at 15:05 +0100, Torfinn Ingolfsen wrote: > Hi, > > On Sat, Mar 13, 2010 at 1:48 PM, Robert Noland <rnol...@freebsd.org> > wrote: > > > Ok, now that agp seems to be working... I have created a port > for the > 2.9.1 version of the Intel driver. You will need to uninstall > the > existing intel driver and install this one. You still won't > have drm, > but should be a good bit better than vesa... > > http://people.freebsd.org/~rnoland/xf86-video-intel29.tar.gz > > Please let me know how it goes. You will likely want to use > UXA > acceleration with this driver. > > deinstalledc the old intel driver, installed the new, and tried > 'startx' as root. > Well, it didn't work. From /var/log/Xorg.0.log: > (II) Module "ramdac" already built-in > drmOpenDevice: node name is /dev/dri/card0 > Failed to change owner or group for file /dev/dri! 2: No such file or > directory > Failed to change owner or group for file /dev/dri/card0! 2: No such > file or directory > drmOpenDevice: open result is -1, (No such file or directory) > Failed to change owner or group for file /dev/dri/card0! 2: No such > file or directory > drmOpenDevice: open result is -1, (No such file or directory) > drmOpenDevice: Open failed > [drm] failed to load kernel module "i915" > (EE) intel(0): [drm] Failed to open DRM device for pci:0000:00:02.0: > File exists > (EE) intel(0): Failed to become DRM master. > (**) intel(0): Depth 24, (--) framebuffer bpp 32 > (==) intel(0): RGB weight 888 > (==) intel(0): Default visual is TrueColor > (II) intel(0): Integrated Graphics Chipset: Intel(R) Clarkdale > (--) intel(0): Chipset: "Clarkdale" > (--) intel(0): Linear framebuffer at 0xD0000000 > (--) intel(0): IO registers at addr 0xFB800000 size 4194304 > (II) intel(0): No SDVO device is found in VBT > (II) intel(0): 2 display pipes available. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) intel(0): Output VGA using monitor section Monitor0 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already > clear > (II) intel(0): Output VGA disconnected > (WW) intel(0): No outputs definitely connected, trying again... > (II) intel(0): Output VGA disconnected > (WW) intel(0): Unable to find initial modes > (EE) intel(0): No valid modes. > (==) intel(0): Write-combining range (0xa0000,0x10000) was already > clear > (II) UnloadModule: "intel" > (II) UnloadModule: "vgahw" > (II) Unloading /usr/local/lib/xorg/modules/libvgahw.so > (EE) Screen(s) found, but none have a usable configuration. > > Fatal server error: > no screens found
Can you send me your Xorg.conf? robert. > HTH > -- > Regards, > Torfinn Ingolfsen -- Robert Noland <rnol...@freebsd.org> FreeBSD _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"