Anthony Agelastos wrote:
Hello and thank you for the very quick reply.
On Jun 25, 2006, at 7:34 PM, albi wrote:
On Sun, 25 Jun 2006 19:28:35 -0400
"Anthony Agelastos" <[EMAIL PROTECTED]> wrote:
I updated CUPS and I cannot print to my USB laser printer. The web
interface shows the following:
hp_LaserJet_1160Le (Default Printer) "Unable to open USB device
"usb:/dev/ulpt0": Permission denied"
Description: Hewlett-Packard LaserJet 1160Le
Location: Den
Make and Model: HP LaserJet 1160 Foomatic/hpijs (recommended)
Printer State: stopped, accepting jobs, published.
Device URI: usb:/dev/ulpt0
are the permissions on /dev/ulpt0 correct ?
I have no idea what it is supposed to be.
%ls -l /dev/ulpt0
crw-r--r-- 1 root operator 0, 68 Jun 25 19:01 /dev/ulpt0
if the printer runs fine as root you know it's likely a
permission-problem
What's the best way to run it as root? When I log into the CUPS web
interface as root and try to print a test page, it gives me the message
I posted above. If, as root, I try to print a Postscript file via lp, it
does nothing.
Thank you all again for your
assistance._______________________________________________
I had the same problem. chown ulpt0 to group cups and add group write.
That will fix it. I added the following to /etc/devfs.rules to make the
fix permanent:
[system=10]
add path 'unlpt*' mode 0660 group cups
add path 'ulpt*' mode 0660 group cups
Don't forget to restart devfs.
HTH,
Micah
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
