...unfortunately, due to re-racking and upgrade requirements, I have to pull the plug. There is nothing hidden or obfuscated in my output, and I am not ashamed of that.
Just a little bit of sadness of having to 'down' it, given this uptime
in my relatively hostile environment. *sigh*
I know this usually generates flames, but in the past, I've seen these
types of messages do more good than harm.
Someone have a beer for me as I watch my personal uptime record go bye-bye:
radius# uptime
11:01PM up 553 days, 13:38, 1 user, load averages: 0.00, 0.00, 0.00
radius# date
Tue May 26 23:01:37 EDT 2009
radius# uname -a
FreeBSD radius.eagle.ca 6.2-RELEASE-p5 FreeBSD 6.2-RELEASE-p5 #0: Thu
Jun 14 15:16:10 EDT 2007
r...@radius.eagle.ca:/usr/obj/usr/src/sys/RADIUS i386
...and for archive purposes:
radius# cat /var/run/dmesg.boot
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p5 #0: Thu Jun 14 15:16:10 EDT 2007
r...@radius.eagle.ca:/usr/obj/usr/src/sys/RADIUS
ACPI APIC Table: <D845WD WD84510A>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.50GHz (1495.16-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 1073479680 (1023 MB)
avail memory = 1041477632 (993 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <D845WD WD84510A> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xde80-0xdebf mem
0xfeafc000-0xfeafcfff,0xfea80000-0xfea9ffff irq 18 at device 12.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:07:e9:9c:df:f3
fxp1: <Intel 82550 Pro/100 Ethernet> port 0xdd80-0xddbf mem
0xfeafb000-0xfeafbfff,0xfea40000-0xfea5ffff irq 19 at device 13.0 on pci2
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:07:e9:9c:df:f4
atapci0: <Promise PDC20267 UDMA100 controller> port
0xdff0-0xdff7,0xdfe4-0xdfe7,0xdfa8-0xdfaf,0xdfe0-0xdfe3,0xdf00-0xdf3f
mem 0xfeaa0000-0xfeabffff irq 22 at device 14.0 on pci2
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci2: <display, VGA> at device 15.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
0xef40-0xef5f irq 19 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
0xef80-0xef9f irq 23 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port
0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xd17ff,0xd1800-0xd27ff,0xd2800-0xd37ff
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1495156112 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
disabled, default to deny, logging limited to 1000 packets/entry by default
ad4: 76319MB <Seagate ST380021A 3.19> at ata2-master UDMA100
ad6: 76319MB <Seagate ST380021A 3.19> at ata3-master UDMA100
ar0: 76319MB <Promise Fasttrak RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
Trying to mount root from ufs:/dev/ar0s1a
Steve
smime.p7s
Description: S/MIME Cryptographic Signature
