Quoting Tony Frank <[EMAIL PROTECTED]>: > Ok, this is wrong - you really just want to define one vinum drive per > physical device. > Ie for a particular disk, give it a single 'vinum' partition using disklabel. > Then use different subdisks to split your space up.
I was afraid of that.... Noted > > 5 volumes: > > V data State: up Plexes: 1 Size: 320 GB > > This is should be ok - it means vinum thinks the volume is still accessable. > That is what I thought, but it wond mount, see below... > > From "man 4 vinum" : > > degraded A RAID-5 plex entry which is accessible, but one subdisk > is down, requiring recovery for many I/O requests. > > So you have a subdisk down which means Vinum can still read from the plex > but has to manually calculate the missing subdisk data. > But I assume it cant write till I replace it.. > > Yes, Vinum believes it can still access your data. > > > I have 4 106gb subdisks, and see 318Gb of data... The 4th subdisk is > > becuase of the loss from Raid5 right? > > Yes, one disk per stripe will be used for parity. > > > Did I set this up incorrectly? > > I suggest you read http://www.vinumvm.org/cfbsd/vinum.pdf - the last section > comments again on the particulars for drive & subdisk layout. > > Typically I see this problem when trying to mount filesystem with incorrect > type. > Was your filesystem ufs? If not you probably need to specify the type to > mount > command using -t parameter. See "man 8 mount" for details. > > Have you tried running fsck against the volume? > > Assuming ufs filesystem, I'd suggest starting with: > > fsck -n -t ufs /dev/vinum/data > > Note the -n option tells fsck not to correct any errors but will give you an > indication about what is going on. fsck -n -t ufs did not work... Seems like fsck does not know -t ... You dont want to see the output from that... Nearly every inode has problems.. I ran it without the -n and the first entry looks like this: UNKNOWN FILE TYPE I=188225^C[12:39 PM [EMAIL PROTECTED]:/usr/home/danny]#fsck /dev/vinum/data ** /dev/vinum/data ** Last Mounted on /usr/jails/ftp/data ** Phase 1 - Check Blocks and Sizes UNKNOWN FILE TYPE I=29 > > There are extra things you can try (recover using alternate super-block) but > perhaps wait and see the results first? How do I read an alternative superblock wih a vinum drive??? > > Another option would be to force the particular subdisk down and try the > above steps again. Something like: vinum down data.p0.s0 ??? _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"