Hello, This was originally posted here: http://forums.freebsd.org/showthread.php?p=168854&posted=1#post168854
I'm building a new PF firewall box based on FreeBSD 9 Release. Motherboard is Foxconn H61S Mini-ITX with Intel PRO/1000 PT dual port server adapter. The adapter is recognized as em0 and em1 but em0 just won't work (i.e no light on the port when connected to the switch) and em1 works only in 100baseTX full-duplex mode (no carrier if I force it to 1000baseT). I tried to change switch port, UTP cable from Cat5e to Cat6 but still no luck. The onboard Realtek works fine. Switch is Netgear GS608. Could it be a bad Intel card? I also tried to compile the latest driver from Intel but it gives error during compilation: http://downloadcenter.intel.com/conf...&Dwnldid=17509<http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/17509/eng/em-7.2.4.tar.gz&lang=eng&Dwnldid=17509> Any help will be greatly appreciated. Thanks! ps: command captures are provided at the url above. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
