Since upgrading to 6-STABLE I get errors on my cardbus NIC. If I have the patience to wait for echo on an ssh terminal one could say that it works, but in a real world it's unusable.
Hopefully helpful details: * Worked fine on 5.4 * Whilst downloading a freebsd iso over ftp, no watchdog timeouts occured and speed was 100%, but immediately after the download finished they started popping up again (connecting seems to be slow though) * Inbound connections on xl1 are extremely laggy, switching screens via ssh take a long while to start but then suddenly the whole screen is redrawn. * My xl0 is fine (3Com 3c905C-TX Fast Etherlink XL) ssh, smb, all works as expected. * booting no-acpi results in the same error snippet from dmesg: cardbus0: Resource not specified in CIS: id=14, size=80 cardbus0: Resource not specified in CIS: id=18, size=80 xl1: <3Com 3c575B Fast Etherlink XL> port 0x1000-0x107f mem 0x88000000-0x8800007f,0x88000080-0x8800 00ff irq 10 at device 0.0 on cardbus0 miibus1: <MII bus> on xl1 tdkphy0: <TDK 78Q2120 media interface> on miibus1 tdkphy0: 10baseT, 100baseTX, auto xl1: Ethernet address: 00:00:86:57:76:22 <cut>cut xl1: watchdog timeout xl1: watchdog timeout xl1: watchdog timeout Anyone got a clue what happens here and how I can fix this? Spil. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
