Ari Suutari wrote:
Hi,I started experimenting with carp, in order to replace freevrrpd stuff we are currently using. I'm running quite recent version of RELENG_6 (compiled this week). I was able to configure carp ok, but for some odd reason the interface goes down by itself shortly after it has been configured. Here is output from test script: # sh -x test.sh + ifconfig carp0 destroy + ifconfig carp0 create + ifconfig carp0 up + ifconfig carp0 inet 192.168.5.59/24 vhid 55 pass xxx123 + ifconfig carp0 carp0: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 192.168.5.59 netmask 0xffffff00 carp: BACKUP vhid 55 advbase 1 advskew 0 + sleep 5 + ifconfig carp0 carp0: flags=8<LOOPBACK> mtu 1500 carp: INIT vhid 55 advbase 1 advskew 0 See, here the interface is up, but after 5 seconds it has gone down. Could anybody give a hint why this happens ? There are messages on console about promiscuous mode being enabled/disabled, but nothing else.
I have seen similar problems when the carp multicast (224.0.0.18) traffic was not allowed to be transmitted to the network due to a firewall configuration problem.
Tom _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
