Hi all,
Any ideas on this one? This machine (one of those ancient VALinux 2U
boxes, Intel L440GX+ board, dual PIII) hangs for a very long time between
the second processor launching and geom_mirror kicking in. It does always
boot, but the hang is more than a minute - just enough to make one
nervous when rebooting remotely...
Is this just the mirror taking a really long time to initialize, or
something more sinister?
Here's part of the dmesg with an indication of where it hangs:
Waiting 5 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da1: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
SMP: AP CPU #1 Launched!
-->> 1 minute+ <<--
GEOM_MIRROR: Device gm0 created (id=3517779574).
GEOM_MIRROR: Device gm0: provider da0 detected.
GEOM_MIRROR: Device gm0: provider da1 detected.
GEOM_MIRROR: Device gm0: provider da1 activated.
GEOM_MIRROR: Device gm0: provider da0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
Any info is appreciated, this is just something I wanted to check out
before bringing this into production (secondary ns, mx w/pfspamd).
Thanks!
Charles
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
