Hi!
MD> http://www.drivesnapshot.de/rfreedos/emm386x8.zip is latest version Tom
Well, I test himem64 on 386DX under MS-DOS. It works. At start it says
"KBC A20 method used". As I understand, it makes more verbose output when
Ctrl-Shift pressed, but under MS-DOS pressed Ctrl prohibits config (and then
autoexec). Some info on driver (excerpt from my MEM with options /DATX):
______________O\_/_________________________________\_/O______________
Segment Size Owner Type / source
------- ----- --------- -----------------
0270 62.1k <system> data area
-02F6 2.07k XMSXXXX0 DEVICE=HIMEM64
Address Attr Driver Program
----------- ---- -------- -----------------
0123:0048 8004 NUL
14CD:008A C800 SMARTAAR NCACHE2
0272:0000 8000 XMSXXXX0 DEVICE=HIMEM64
XMS version: 3.00 Line A20: enabled
Driver revision: 3.0A HMA: allocated
Free handles: 28
Handle Size Locks ( offset )
------ ----- ----------------
1778 97.0k
1788 512k
1798 25.0k
Memory type Total - Used = Free (largest)
---------------- ------- -------- ---------------
Extended (INT15) 7.00M 0
Extended (XMS16) 6.31M ( 6.31M)
Extended (XMS32) 6.31M ( 6.31M)
---------------- ------- -------- ---------------
MS-DOS 6.22 is resident in the high memory area (HMA).
_____________________________________________________________________
O/~\ /~\O
Note "Driver revision" - there is bug (DRIVER_VER in himem64.asm should be
equal to 0310h). In compare with QEMM (and MS-HIMEM) I see, that himem64
makes less free handles (28 versus 58 and 31) and it implements INT 2F/4309
(see "Handle" column). What I may say more?
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Freedos-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freedos-devel
