I run MTCP and have for a while and it works great, ftp server etc. I
have fresh installatio of 1.3 on an
old fujitsi-siemens 1000 mhz, with an intel 815 chipset so the e1000pkt
works fine with DHCP and it
updates the .cfg. I ran the wattcp.bat and have a wattcp.cfg in
freedos\bin. Paths to wattcp and MTCP
cfgs in fdauto.bat and this, as suggested in freedos wiki instructions,
fdauto:
"if not exist %dosdir%\bin\fdnet.bat goto NoNetwork
e1000pkt 0x60
call %dosdir%\bin\fdnet.bat start
c:\ddhcp\ddhcp /w /f"
But i get this at boot (ftpsrv, browsing etc. works though) ;
"
Packet Driver for Intel (R) PRO/1000 Family of Desktop & Server adapters
v0.50
Copyright (C) Intel Corportation 2006. All rights reserved.
PCI BIOS is required for this driver
HERE COMES THE STRANGE PART
Physical network not supported at the moment (My translation from
swedish).
IP address : 192.168.1.247
Netmask : 255.255.255.0
Gateway : 192.168.1.1
DNS sever : 192.168.1.1
Lease time: 43200 "
What am I doing wrong to get the same Message as before I configured
anything ?
things work though !
Have good day :)
Bear
_______________________________________________
Freedos-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freedos-user
