Thanks; I'll check my .ini files and net.exe versions against what you list below. Your issue about the application is something I neglected to mention in my original post: I'm using a FreeBasic app (self-written) for this.
Dave > -----Original Message----- > From: Ulrich Hansen [mailto:[EMAIL PROTECTED] > Sent: Thursday, September 04, 2008 3:34 AM > To: David C. Kerber > Cc: freedos-user@lists.sourceforge.net > Subject: Re: [Freedos-user] Can write but not read network share > > Hi David, > > David C. Kerber schrieb: > > What version of Net.exe are you using? The one from the > client 3.0? I believe I'm using the one from the WG1049 (dos > server) package I asked you about last week, so I'll see if > changing it helps. > > I also use the NET.EXE from WG1049, which is dated from 06.06.94 > > I have three versions here: > - one from the msclient 3.0 disk 1, dated from 07.02.95, > which has no server functions > - one from the nnet.exe update, dated from 06.03.1995, > including server functions. > - one from WG1049, 06.06.94 including server functions. > > As you use the FreeDOS machine only as client, you might want > to try the original ms client version. > > Did you do any changes to the XP side? Did you turn the > firewall off for testing? > > I post my PROTOCOL.INI and SYSTEM.INI from MS CLIENT's NET > directory and my system files, maybe you want to compare the settings. > > BTW: I just noticed: Copying files from and to a mapped XP > drive works well on the command line. But if I use DOS > navigator (V.1.51) to copy a file "test.txt" from c:\ on my > freedos machine to the mapped drive I:\ of the XP machine DN > asks: "File I:\test.txt already exists in destination > directory" and I can choose to Overwrite / Append/ Rename/ > Skip/ Cancel. Overwriting does the trick. But this happens > with every attempt to copy any file. So it depends from the > application too. > > regards > Uli > > ___________________________________________________________________ > PROTOCOL.INI > > [network.setup] > version=0x3110 > netcard=PC_CARD,1,PC_CARD,1 > transport=tcpip,TCPIP > lana0=PC_CARD,1,tcpip > > [protman] > DriverName=PROTMAN$ > PRIORITY=MS$NDISHLP > > [PC_CARD] > DriverName=DFE670$ > > [MS$NDISHLP] > DriverName=ndishlp$ > BINDINGS=PC_CARD > > [MS$NETBEUI] > DriverName=netbeui$ > SESSIONS=10 > NCBS=12 > BINDINGS=PC_CARD > LANABASE=0 > > [MS$NWLINK] > FRAME=ETHERNET_802.2 > DriverName=nwlink$ > BINDINGS=PC_CARD > > [PKTDRV] > drivername=PKTDRV$ > bindings=PC_CARD > intvec=0x60 > chainvec=0x66 > > [TCPIP] > NBSessions=6 > DefaultGateway0=192 168 1 1 > SubNetMask0=255 255 255 0 > IPAddress0=192 168 1 80 > DisableDHCP=1 > DriverName=TCPIP$ > BINDINGS=PC_CARD > LANABASE=0 > > > ___________________________________________________________________ > SYSTEM.INI > > [network] > sizworkbuf=1498 > filesharing=yes > printsharing=yes > autologon=no > computername=freedos > lanroot=C:\NETWORK\NET > username=freedos > workgroup=CHAOS > reconnect=no > dospophotkey=N > lmlogon=0 > logondomain=CHAOS > preferredredir=full > autostart=basic > maxconnections=8 > > [network drivers] > netcard=DFE670.DOS > transport=tcpdrv.dos,nemm.dos,dis_pkt9.dos > > devdir=C:\NETWORK\NET > LoadRMDrivers=yes > > [Password Lists] > *Shares=C:\NETWORK\NET\Shares.PWL > FREEDOS=C:\NETWORK\NET\FREEDOS.PWL > > [386enh] > TimerCriticalSection=5000 > UniqueDosPSP=TRUE > PSPIncrement=2 > > > ___________________________________________________________________ > And the relevant sections from AUTOEXEC.BAT > > @echo off > > SET dosdir=C:\FDOS > set PATH=%dosdir%\bin > SET PATH=%PATH%;C:\CPQDOS;C:\UTIL;C:\NETWORK;C:\NETWORK\PCMCIA; > set NLSPATH=%dosdir%\NLS > set HELPPATH=%dosdir%\HELP > set temp=%dosdir%\temp > set tmp=%dosdir%\temp > set emu387=C:\UTIL\WMEMU387.DXE > > SET PATH=%PATH%;C:\NETWORK\NET; > > REM Initialize the net first for MS TCP/IP: > C:\NETWORK\NET\net initialize > REM Further TCP/IP drivers will be started below > > > LH DISPLAY CON=(EGA,,1) > MODE CON CP PREP=((858) C:\FDOS\cpi\EGA.CPX) LH MODE CON CP > SEL=858 LH C:\FDOS\BIN\SHARE.COM /L:500 /F:2048 /L:20 > > LH C:\FDOS\BIN\CWSDPMI.EXE -R > > SET autofile=C:\autoexec.bat > alias reboot=fdapm warmboot > alias halt=fdapm poweroff > alias suspend=fdapm suspend > SET CFGFILE=C:\fdconfig.sys > LH KEYB GR,,keyboard.sys > mouse > > REM Activate also those drivers for MS TCP/IP---------- > C:\NETWORK\NET\netbind.com LH C:\NETWORK\NET\umb.com > C:\NETWORK\NET\tcptsr.exe C:\NETWORK\NET\tinyrfc.exe LH > C:\NETWORK\NET\nmtsr.exe C:\NETWORK\NET\emsbfr.exe LH > C:\NETWORK\NET\net start > > goto end > > :END > > > ___________________________________________________________________ > And the relevant sections from FDCONFIG.SYS > > > COUNTRY=001,858,C:\FDOS\BIN\COUNTRY.SYS > SET lang=DE > LASTDRIVE=Z > FILES=40 > BUFFERS=25 > DOS=HIGH,UMB > DOSDATA=UMB > > set dircmd=/ogn /4 > > ; Memory management > DEVICE=C:\FDOS\BIN\JEMMEX.EXE ALTBOOT NOEMS X=D000-D7FF NOVME NOINVLPG > > ; Other Settings > ; -------------------------------- > VERSION=6.22 > STACKS=0,0 > > ; Enable PCMCIA: > ; -------------------------------- > > DEVICEHIGH=C:\NETWORK\PCMCIA\SSVLSI.EXE > DEVICEHIGH=C:\NETWORK\PCMCIA\CS.EXE > DEVICE=C:\NETWORK\PCMCIA\CSALLOC.EXE > > ; This is needed for MS Client 3.0 > DEVICE=C:\NETWORK\NET\IFSHLP.SYS > > ; Load Autoexec.bat > ; -------------------------------- > SHELL=C:\FDOS\bin\command.com C:\FDOS\bin /E:2048 /P=C:\autoexec.bat > > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
