On Tue, 09 Aug 2016 13:57:35 -0400, Dimitris Zilaskos <dimitr...@gmail.com> wrote:
> The issue I am facing now is that the mechanical drives I connected to > the > secondary IDE channel of my Vesa Local Bus controller are not detected. > Windows 98 SE bootdisk does not detect them either, The BIOS of my system > only supports 2 hard drives. IIRC, if your motherboard BIOS only supports two drives, you could use a controller card with its own onboard ROM for additional drives to be recognized under DOS (or Win9x). Depending on what chipset the card uses, there might also be a driver which can enable the second channel. Not sure if the various DMA DOS drivers would detect and add drives on the second channel (in fact, I don't know if they work on ISA/VL IDE controllers or if PCI is required) ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
