On Thu, 1 Jul 2004, Daniel Eyholzer wrote:

> Hi there
>
>
> I am using FreeRADIUS Version 0.9.3 and I need to set up an ippool with
> addresses that are not subsequent. I have two ranges of addresses, say
> 192.168.2.0/24 and 192.168.6.0/24. According to what I have read I can set
> only one range-start and one range-stop parameter for a single ippool.
> Therefore it is not feasible to create an ippool with addresses from
> different ranges that are not subsequent, am I right with this assumption?
>
> I have tried to solve this problem by creating two separate ippools for
> each of the two ranges. In the post-auth section I did set the following:
>
> post-auth {
>         #  Get an address from the IP Pool.
>         redundant {
>                 mypool1
>                 mypool2
>         }
> }
>
> But this does not seems to work, because I can not add more than one
> Pool-Name check item attribute for a single user, can't I?
> If a user has set his Pool-Name attribute to mypool1 and mypool1 has no
> more addresses available, he will not get any addresses, because he was
> never assigned to mypool2. Therefore mypool2 will always return noop for
> the request.
>
> Does anyone has a similar setup and knows how to solve this problem? I have
> searched the net and the mailinglist, but did not find any working
> solution.


Do a cvs update on the ippool module or wait for tomorrow's CVS snapshot. Then
you can set Pool-Name to DEFAULT and it will match all of the ippool module
instances.

>
>
> I would be most grateful for any hints!
>
>
> Regards, Daniel
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>

--
Kostas Kalevras         Network Operations Center
[EMAIL PROTECTED]       National Technical University of Athens, Greece
Work Phone:             +30 210 7721861
'Go back to the shadow' Gandalf

- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to