On Wed, 7 Jan 2009, t...@kalik.net wrote:
I now want to assign a few users different, static IPs using this:
testuser Service-Type == Framed-User
Framed-Protocol == PPP,
Framed-IP-Address = 192.168.1.2,
Framed-IP-Netmask = 255.255.255.0,
Framed-Compression = Van-Jacobson-TCP-IP
This sort of thing used to work fine with Cisco dialup NAS's and Cistron,
even though the NAS had no pool using that IP range in its config...radius
just forced it to override the default pool, but in this case, it just
keeps assigning an IP from the NAS pool (and yes, I have the above
statement ABOVE the DEFAULT statement).
Is Framed-IP-Address in the Access-Accept packet? You should probably
return Service-Type as well. If attribute is not in the accept packet
post the debug.
It appears to be. From debug, after "Login OK":
+- entering group post-auth
++[exec] returns noop
Framed-Protocol == PPP
Framed-IP-Address = 192.168.1.2 (The address I want)
Framed-IP-Netmask = 255.255.255.0
Framed-Compression = Van-Jacobson-TCP-IP
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 1 ID 195 with timestamp +79
Ready to process requests.
However, that is not the IP that my client shows...it shows 192.168.0.2,
which is from the pool defined in the Cisco router's config. It seems to
be overriding the radius users' config.
James Smallacombe PlantageNet, Inc. CEO and Janitor
u...@3.am http://3.am
=========================================================================
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
