At present my setup uses peap/ms-chapV2 to authenticate users is it possible to have an entry in the users file that will allow users to connect regardless of the username/password combo they input at the login box . I did try *DEFAULT Auth-Type := Accept*, but it didn't work
rad_recv: Access-Request packet from host 10.10.3.29 port 1645, id=208, length=154 User-Name = "anything" Framed-MTU = 1400 Called-Station-Id = "0021.55ac.f2d0" Calling-Station-Id = "0013.0229.bf35" Cisco-AVPair = "ssid=swordfish" Service-Type = Login-User Message-Authenticator = 0x02152f851db652adcceccf557c2c9b5f EAP-Message = 0x0202000b01747972757275 NAS-Port-Type = Wireless-802.11 NAS-Port = 13008 NAS-Port-Id = "13008" NAS-IP-Address = 10.107.3.29 NAS-Identifier = "THEO" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anything", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 207 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = Accept Auth-Type = Accept, accepting the user +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 208 to 10.10.3.29 port 1645 Finished request 0. Version: FR-2.1.8
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html