Hi Alan
I tryed tweaking a few settings and then re did the config on the ap from
scratch and it works.
Thanks for your help
Andrew Paternoster
--
Andrew Paternoster
GPK Computers Pty Ltd
T 1300 854 223
F 1300 854 228
---------------------------------------------------------------------------
The information contained in or accompanying this e-mail is intended only for
the use of the stated recipient and may contain information that is
confidential and/or privileged. If the reader is not the intended recipient or
the agent thereof, you are hereby notified that any dissemination, distribution
or copying of this e-mail is strictly prohibited and may constitute a breach of
confidence and/or privilege. If you have received this e-mail in error, please
notify us immediately. Any views or opinions presented are those solely of the
author and do not necessarily represent those of GPK Computers Pty Ltd..
Warning: Although the company has taken reasonable precautions to ensure no
viruses are present in this e-mail, the company cannot accept responsibility
for any loss or damage arising from the use of this e-mail or attachments
---------------------------------------------------------------------------
Did you know that you can now log faults just by sending an email to
supp...@gpk.net.ausenior System Engineer________________________________________
From: freeradius-users-bounces+andrew=gpk.net...@lists.freeradius.org
[freeradius-users-bounces+andrew=gpk.net...@lists.freeradius.org] on behalf of
Alan Buxey [a.l.m.bu...@lboro.ac.uk]
Sent: Monday, 17 May 2010 6:18 PM
To: FreeRadius users mailing list
Subject: Re: Cisco AP's with WPA sending Accounting info.
Hi,
> Hi List.
>
> I have been trying to get some Cisco 1130AG's to work with freeradius. I have
> go them to authentcate but can not get them to send accounting data. I think
> i has somthing to with with the peap tunnel. as i remember seeing it listed
> some where. My question is how do others to accounting on WPA wireless
> clients? There is accounting stuff that i have setup in the cisco AP but it
> doesnt seems to do anything.
autonomous ('fat') or LWAPP/CAPWAP (thin, centrally managed)?
you can ensure that you copy the inner tunnel to the outer (thats an option in
eap.conf)
but just ensure that you have the right options set on the NAS - if you dont
get anything
at the server end it would suggest the NAS
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
