Thanks for the input, Was not sure if I needed Ldap. Didn't know if it was there as a replica in-case a DC went down. On Tuesday I will go back and clean some things up and remove ldap from the picture. Then start tweeking it to be more and locked it down some more. Thanks again for the help!
Eric On Sat, May 28, 2011 at 10:25 AM, Alan DeKok <al...@deployingradius.com>wrote: > e...@mixeduperic.com wrote: > > I have tried following both these two > > guides: > > > http://www.perkinsblog.net/blog/index.php/2010/02/freeradius-and-windows-ad/ > > I'm always amazed at the work people put into things. He spent tons > of time "googling for help", when the next URL is linked from the wiki, > and is the third link when searching for "freeradius active directory" > > > http://deployingradius.com/documents/configuration/active_directory.html. > > I can authenticate just find using some of the tools and local commands > to > > test however When I start freeradius and try and connect using wireless I > > get some errors. Below are the errors I am seeing when running freeradius > > in debug mode (radiusd -X): > > > rlm_ldap: LDAP login failed: check identity, password settings in ldap > > section of radiusd.conf > > Well... have you tried doing that? > > And *my* guide doesn't tell you to set up LDAP. > > Follow my guide. It works. Same with the Wiki. Nearly *everything* > else is broken and misleading. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
