Chuang Okis wrote: > Have anyone test the performance about FreeRADIUS+jRadius on authentication?
Not me. > The test was just for authentication load test from gateway to radius > server. My jradius handler would just do some easy string splitng for > one VSA. Use Perl. It's integrated into the server, and should be much faster. Or, use a regex. See "man unlang". Or, write a C module to do it. > Does this be the most probable factor causing the slow processing? Even > through I doubt it... Yes. It's jradius. > Then I did some interesting test later... > I left my handler empty but still let traffic get into jradius handler > through rlm_jradius by TCP socket. > The result has improved a bit even though not at our level of acceptance.. > Its TPS (Transaction Per Seconds) improved from 30 to 300 approximately. 300 is still MUCH slower than 10,000. > Hence, I'm guessing the bottleneck may be the process of rlm_jradius > communication. > Does anyone get any help or recommendation?? > Or any other performance tuning tips I can do? Don't use jradius. It's very slow. Use pretty much anything else. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html