People, I have a very simple call scenario where calls are hitting FreeSWITCH, and I need to send a 302 REDIRECT to get them to go elsewhere without answering them.
It's for a phased migration requirement so that traffic can continue to flow to the current site, but gets redirected to a new site. The old site will eventually be decommissioned. Here is what I have in my conf/dialplan/public/test.xml: <include> <extension name="test-inbound"> <condition field="destination_number" expression="^(?:7153)(\d+)$"> <action application="redirect" data="sip:715...@aaa.bbb.ccc.ddd"/> </condition> </extension> </include> FreeSWITCH is sending back the 302 back to the test end-point (eyeBeam 1.5.20 build 54436), but the call is not reaching the specified in the data portion of the redirect application. I know it's sending it because of logs FreeSWITCH end and the info being displayed on eyeBeam's client interface stating Call being forwarded ...etc. ...etc. Has anyone had any similar experiences with a similar setup ? Oh, and one more thing, I have disabled firewalling on both the proxy where eyeBeam is registered and the destination where I'm sending the call. I have also verified that my new destination (also a FreeSWITCH box) is accepting registrations, inviites and able to route calls initiated by eyeBeam when directly registered on it. Has anyone had similar experiences ? better still, has anyone successfully setup FreeSWITCH to be an SBC and can give me feedback ? Regards, Ahmed. -- Ahmed A. Ibrahim-Naji Al-Alousi Ph.D., MIEE, MBCS, CCIE
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org