> CONFIG_VORTEX=y seems like the right one. Is there anything interesting from > dmesg or /var/log/messages? > > dmesg | grep eth > grep eth /var/log/messages > > Zac 3c905 card is eth0 in my case. In /var/log/messages concerning eth0 I have: Dropping NETIF_F_SG since no checksum feature.
I'm going to try below. askar > config VORTEX > tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" > support" > depends on NET_VENDOR_3COM && (PCI || EISA) > select MII > ---help--- > This option enables driver support for a large number of 10mbps and > 10/100mbps EISA, PCI and PCMCIA 3Com network cards: > > "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI > "Boomerang" (EtherLink XL 3c900 or 3c905) PCI > "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus > "Tornado" (3c905) PCI > "Hurricane" (3c555/3cSOHO) PCI > > If you have such a card, say Y and read the Ethernet-HOWTO, > available from <http://www.tldp.org/docs.html#howto>. More > specific information is in > <file:Documentation/networking/vortex.txt> and in the comments at > the beginning of <file:drivers/net/3c59x.c>. > > To compile this support as a module, choose M here and read > <file:Documentation/networking/net-modules.txt>. > > > -- gentoo-user@gentoo.org mailing list
