Hello all, I just built a new machine (celeron 3 GHz) using a script that builds the kernel using genkernel and a config that is copied from that of the kernel on the install cd. The latter was downloaded and burned from a very recent autobuild.
The build process appears to complete successfully, with nothing untoward in the logs. However, the machine will not boot but hangs at this point in the process: root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/kernel-genkernel-x86-2.6.32-gentoo-r7 root=/dev/ram0 init=linuxrc ramdisk=8192 real_root=/dev/sda3 vga=791 [Linux-bzImage, setup=0x3000, size=0x2a8d80] This is the grub.conf: default 0 timeout 5 title Gentoo genkernel-x86-2.6.32-gentoo-r7 root (hd0,0) kernel /boot/kernel-genkernel-x86-2.6.32-gentoo-r7 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 vga=791 initrd /boot/initramfs-genkernel-x86-2.6.32-gentoo-r7 I have verified that the names of the kernel and initrd on the disk match those in grub.conf. In any case a wrong filename is usually signalled as 'not found' during the boot process. Can anyone suggest how to debug this? Thanks, Roger
