On Tuesday 14 Jun 2011 15:42:52 Cahn Roger wrote: > Hi Mick, > > > What does the router log show? > > Euh, how can I get it???
It depends on your router. Usually routers have at least a GUI control panel access and one of the pages shows recent attempts to connect and authenticate. Are your running some sort of an access control list on the router and have not included your MAC address? > > Can you please share: > > ifconfig eth0 > > ifconfig eth0 > eth0 Lien encap:Ethernet HWaddr 00:1e:8c:4a:44:db > inet adr:169.254.79.43 Bcast:169.254.255.255 > Masque:255.255.0.0 adr inet6: fe80::21e:8cff:fe4a:44db/64 Scope:Lien > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:110 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 lg file transmission:1000 > RX bytes:0 (0.0 B) TX bytes:20708 (20.2 KiB) > Interruption:17 The Rx bytes is zero - your router does not seem to respond. Does this also stay zero if you set up a static address and route on the PC and try to ping the router? > /etc/conf.d/net > > # This blank configuration will automatically use DHCP for any net.* > # scripts in /etc/init.d. To create a more complete configuration, > # please review /etc/conf.d/net.example and save your configuration > # in /etc/conf.d/net (this file :]!). > > config_eth0="dhcp" > > In the box I stopped the option fixed adresses, > but the problem remains the same :-( Try setting an address manually: ifconfig eth0 192.168.1.20 broadcast 192.168.1.255 netmask 255.255.255.0 route add default gw 192.168.1.1 (assuming that this is your router) and then try to ping it: ping -c 3 192.168.1.1 If you can ping it and get a response then the problem is probably with the router. -- Regards, Mick
signature.asc
Description: This is a digitally signed message part.
