Greetings,

Last night I had to reboot my box because the screen had gone all
wonky.  The reboot has resulted in an obviously different font being
used in terminal windows, emacs, etc, etc.

Comparing Xorg logs from Oct (the previous reboot) to now, Xorg has
been upgraded from 1.12.2 to 1.13.0.  The logs are similar for approx
400 lines, then diverge.  Below is shown the beginning of the log
file differences.

Any suggestions?

Thanks.

David



********** 1.12.2 **********

 (++) using VT number 7

 (II)  drm report modesetting isn't supported.
 (II) RADEON(0): TOTO SAYS 00000000fdbf0000
 (II) RADEON(0): MMIO registers at 0x00000000fdbf0000: size 64KB
 (II) RADEON(0): PCI bus 1 card 5 func 0
 (II) RADEON(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
 (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
 (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
 (==) RADEON(0): Default visual is TrueColor
 (II) Loading sub module "vgahw"
 (II) LoadModule: "vgahw"
 (II) Loading /usr/lib64/xorg/modules/libvgahw.so
 (II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.12.2, module version = 0.1.0
        ABI class: X.Org Video Driver, version 12.0

 (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
 (==) RADEON(0): RGB weight 888
 (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
 (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791e)
 (--) RADEON(0): Linear framebuffer at 0x00000000f0000000
 (II) RADEON(0): PCI card detected
 (II) Loading sub module "int10"
 (II) LoadModule: "int10"
 (II) Loading /usr/lib64/xorg/modules/libint10.so
 (II) Module int10: vendor="X.Org Foundation"
        compiled for 1.12.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 12.0
 (II) RADEON(0): initializing int10
 (II) RADEON(0): Primary V_BIOS segment is: 0xc000
 (II) RADEON(0): ATOM BIOS detected
 (II) RADEON(0): ATOM BIOS Rom: 
        SubsystemVendorID: 0x1043 SubsystemID: 0x826d
        IOBaseAddress: 0xcc00
        Filename: BR25534.BIN 
        BIOS Bootup Message: 
ATI Radeon Xpress ?1250? for Asus/M2A-VM                                    

 (II) RADEON(0): Framebuffer space used by Firmware (kb): 16
 (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffc000
 (II) RADEON(0): AtomBIOS requests 16kB of VRAM scratch space
 (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffc000
 (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory 
instead
 (II) RADEON(0): Default Engine Clock: 400000
 (II) RADEON(0): Default Memory Clock: 200000
 (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
 (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
 (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
 (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
 (II) RADEON(0): Maximum Pixel Clock: 400000
 (II) RADEON(0): Reference Clock: 14320
 drmOpenDevice: node name is /dev/dri/card0
  failed to load kernel module "radeon"

********** 1.13.0 **********

 (++) using VT number 7

 (II) [KMS] drm report modesetting isn't supported.
 (WW) Falling back to old probe method for fbdev
 (II) Loading sub module "fbdevhw"
 (II) LoadModule: "fbdevhw"
 (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
 (II) Module fbdevhw: vendor="X.Org Foundation"
        compiled for 1.13.0, module version = 0.0.2
        ABI class: X.Org Video Driver, version 13.0
 (EE) open /dev/fb0: No such file or directory
 (EE) Screen 0 deleted because of no matching config section.
 (II) UnloadModule: "radeon"
 (II) Loading sub module "vbe"
 (II) LoadModule: "vbe"
 (II) Loading /usr/lib64/xorg/modules/libvbe.so
 (II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.13.0, module version = 1.1.0
        ABI class: X.Org Video Driver, version 13.0
 (II) Loading sub module "int10"
 (II) LoadModule: "int10"
 (II) Loading /usr/lib64/xorg/modules/libint10.so
 (II) Module int10: vendor="X.Org Foundation"
        compiled for 1.13.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 13.0
 (II) VESA(0): initializing int10
 (II) VESA(0): Primary V_BIOS segment is: 0xc000

Reply via email to