2018-04-17 18:29 GMT-03:00 Heiko Baums <li...@baums-on-web.de>: > Am Tue, 17 Apr 2018 17:20:21 +0000 > schrieb Francisco Ares <fra...@gmail.com>: > > > Can anyone tell me how to set up the scanner part of an Epson L380? > > It's most likely done this way (at least for printers which need the > open source driver ESC/P-R): > > - Install sane. > - In /etc/sane.d/dll.conf uncomment the line epson2. > - In /etc/sane.d/epson2.conf set or uncomment those lines: > > usb > usb <vendor ID> <product ID> > net <IP address | autodiscovery> > > If you have it connected via Wifi you probably need to configure it for > USB, too. At least you can configure it for both connection types at > the same time. > > Just in case, you won't be able to use this printer with a Raspberry Pi, > because it needs the proprietary ESC/P driver. If you consider > connecting an EPSON printer to a Raspberry Pi you would need a printer > which needs the open source driver ESC/P-R. > > Heiko > > Regarding the printer part of the Epson L380, the package net-print/gutenprint does the job, so this part is solved.
The question remains regarding the scanner part. I'll try your suggestions, then I get back with the results. Thanks! Francisco
