> > > > > My power supply's fan died and ended up really elevating the > > > > > temperature in the case during a qt compile. Now I'm seeing all kinds > > > > > of strange and colorful artifacts on the screen, even after the system > > > > > was powered off for several hours with an external fan blowing on it. > > > > > > > > > > Is that definitely the video card? > > > > > > > > Sounds like it. Just in case it has not been totalled you may want to > > > > open the case, remove the video card and use a soft brush and vacuum > > > > cleaner to clean its cooling fan and heatsink. This may be underneath > > > > the card and difficult to reach without taking it out. While you're at > > > > it, repeat the exercise on the CPU. > > > > > > Or maybe it's the thermal grease paste, it usually doesn't like being > > > roasted. Replace it, if possible. > > > > > > I'm not an expert on this kind of stuff but I had similar artifacts while > > > overclocking my video RAM so maybe the chips didn't make it. > > > > http://www.arcticsilver.com/ > > > > I have used Arctic Silver 5 and have been very happy with it (on an > > overclocked PIII). > > It's also quite possible its the PSU if your still using the same one, > have you replaced it?
Really, the power supply itself could be causing the video problems? I am still using the same one with the case open for ventilation. I'm about to order some stuff from New Egg. Not sure if I should include a video card now. - Grant -- [EMAIL PROTECTED] mailing list