Thursday, May 22, 2008, 2:42:23 PM, Paul wrote: > Hey Guys,
> I'm trying to get a hypervisor running. I've installed Gentoo 64bit on a > new(ish) HP XW6400. When booted with the minimal install CD, /proc/cpuinfo > shows: > livecd ~ # cat /proc/cpuinfo > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Xeon(R) CPU 5140 @ 2.33GHz > stepping : 6 > cpu MHz : 2327.500 > cache size : 4096 KB > physical id : 3 > siblings : 2 > core id : 0 > cpu cores : 2 > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx > lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est > tm2 ssse3 cx16 xtpr dca lahf_lm > bogomips : 4657.74 > clflush size : 64 > cache_alignment : 64 > address sizes : 36 bits physical, 48 bits virtual > power management: > When running my Xen kernel (xen-sources 2.6.21), I get the following: > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Xeon(R) CPU 5140 @ 2.33GHz > stepping : 6 > cpu MHz : 2327.560 > cache size : 4096 KB > physical id : 0 > siblings : 1 > core id : 0 > cpu cores : 1 > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu de tsc msr pae cx8 apic sep mtrr cmov pat clflush > acpi mmx fxsr sse sse2 ss ht syscall nx lm constant_tsc pni ssse3 cx16 > lahf_lm > bogomips : 4657.82 > clflush size : 64 > cache_alignment : 64 > address sizes : 36 bits physical, 48 bits virtual > power management: > I'm going slightly nuts here - I figure I've done something obvious wrong, > but I can't think what. Any ideas/advice? Something I've missed in > menuconfig? > Cheers in advance! > Paul Use x86info to get CPU extended features. -- Sergey -- gentoo-user@lists.gentoo.org mailing list
