The current tcsh-completion support for Git, as can be found on the
Internet, takes the approach of defining the possible completions
explicitly. This has the obvious draw-back to require constant
updating as the Git code base evolves.
The approach taken by this commit is to to re-use the advanced bash
completion script and use its result for tcsh completion. This is
achieved by executing (versus sourcing) the bash script and
outputting the completion result for tcsh consumption.
Three solutions were looked at to implement this approach with (A)
being retained:
A) Modifications:
git-completion.bash and new git-completion.tcsh
Modify the existing git-completion.bash script to support
being sourced using bash (as now), but also executed using bash.
When being executed, the script will output the result of the
computed completion to be re-used elsewhere (e.g., in tcsh).
The modification to git-completion.bash is made not to be
tcsh-specific, but to allow future users to also re-use its
output. Therefore, to be general, git-completion.bash accepts a
second optional parameter, which is not used by tcsh, but could
prove useful for other users.
Pros:
1- allows the git-completion.bash script to easily be re-used
2- tcsh support is mostly isolated in git-completion.tcsh
Cons (for tcsh users only):
1- requires the user to copy both git-completion.tcsh and
git-completion.bash to ${HOME}
2- requires bash script to have a fixed name and location:
${HOME}/.git-completion.bash
B) Modifications:
git-completion.bash
Modify the existing git-completion.bash script to support
being sourced using bash (as now), but also executed using bash,
and sourced using tcsh.
Pros:
1- only requires the user to deal with a single file
2- maintenance more obvious for tcsh since it is entirely part
of the same git-completion.bash script.
Cons:
1- tcsh support could affect bash support as they share the
same script
2- small tcsh section must use syntax suitable for both tcsh
and bash and must be at the beginning of the script
3- requires script to have a fixed name and location:
${HOME}/.git-completion.sh (for tcsh users only)
C) Modifications:
New git-completion.tcsh
Provide a short tcsh script that converts git-completion.bash
into an executable script suitable to be used by tcsh.
Pros:
1- tcsh support is entirely isolated in git-completion.tcsh
2- new tcsh script can be as complex as needed
Cons (for tcsh users only):
1- requires the user to copy both git-completion.tcsh and
git-completion.bash to ${HOME}
2- requires bash script to have a fixed name and location:
${HOME}/.git-completion.bash
3- sourcing the new script will generate a third script
Approach (A) was selected to keep the tcsh completion support well
isolated without introducing excessive complexity.
Signed-off-by: Marc Khouzam <marc.khou...@gmail.com>
---
Here is the updated version of the patch.
I got git send-email to work, so I hope the formatting will be correct.
Thanks in advance.
Marc
contrib/completion/git-completion.bash | 47 ++++++++++++++++++++++++++++++++
contrib/completion/git-completion.tcsh | 29 +++++++++++++++++++
2 files changed, 76 insertions(+), 0 deletions(-)
create mode 100644 contrib/completion/git-completion.tcsh
diff --git a/contrib/completion/git-completion.bash
b/contrib/completion/git-completion.bash
index be800e0..d71a016 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2481,3 +2481,50 @@ __git_complete gitk __gitk_main
if [ Cygwin = "$(uname -o 2>/dev/null)" ]; then
__git_complete git.exe __git_main
fi
+
+# Method that will output the result of the completion done by
+# the bash completion script, so that it can be re-used in another
+# context than the bash complete command.
+# It accepts 1 to 2 arguments:
+# 1: The command-line to complete
+# 2: The index of the word within argument #1 in which the cursor is
+# located (optional). If parameter 2 is not provided, it will be
+# determined as best possible using parameter 1.
+__git_complete_with_output ()
+{
+ # Set COMP_WORDS in a way that can be handled by the bash script.
+ COMP_WORDS=($1)
+
+ # Set COMP_CWORD to the cursor location as bash would.
+ if [ -n "${2-}" ]; then
+ COMP_CWORD=$2
+ else
+ # Assume the cursor is at the end of parameter #1.
+ # We must check for a space as the last character which will
+ # tell us that the previous word is complete and the cursor
+ # is on the next word.
+ if [ "${1: -1}" == " " ]; then
+ # The last character is a space, so our location is at
the end
+ # of the command-line array
+ COMP_CWORD=${#COMP_WORDS[@]}
+ else
+ # The last character is not a space, so our location is
on the
+ # last word of the command-line array, so we must
decrement the
+ # count by 1
+ COMP_CWORD=$((${#COMP_WORDS[@]}-1))
+ fi
+ fi
+
+ # Call _git() or _gitk() of the bash script, based on the first
+ # element of the command-line
+ _${COMP_WORDS[0]}
+
+ local IFS=$'\n'
+ echo "${COMPREPLY[*]}"
+}
+
+if [ -n "${1-}" ] ; then
+ # If there is an argument, we know the script is being executed
+ # so go ahead and run the _git_complete_with_output function
+ __git_complete_with_output "${1-}" "${2-}"
+fi
diff --git a/contrib/completion/git-completion.tcsh
b/contrib/completion/git-completion.tcsh
new file mode 100644
index 0000000..6096ea8
--- /dev/null
+++ b/contrib/completion/git-completion.tcsh
@@ -0,0 +1,29 @@
+#!tcsh
+#
+# tcsh completion support for core Git.
+#
+# Copyright (C) 2012 Marc Khouzam <marc.khou...@gmail.com>
+# Distributed under the GNU General Public License, version 2.0.
+#
+# This script makes use of the git-completion.bash script to
+# determine the proper completion for git commands under tcsh.
+#
+# To use this completion script:
+#
+# 1) Copy both this file and the bash completion script to your ${HOME}
directory
+# using the names ${HOME}/.git-completion.tcsh and
${HOME}/.git-completion.bash.
+# 2) Add the following line to your .tcshrc/.cshrc:
+# source ${HOME}/.git-completion.tcsh
+
+# One can change the below line to use a different location
+set __git_tcsh_completion_script = ${HOME}/.git-completion.bash
+
+# Check that the user put the script in the right place
+if ( ! -e ${__git_tcsh_completion_script} ) then
+ echo "ERROR in git-completion.tcsh script. Cannot find:
${__git_tcsh_completion_script}. Git completion will not work."
+ exit
+endif
+
+complete git 'p/*/`bash ${__git_tcsh_completion_script} "${COMMAND_LINE}" |
sort | uniq`/'
+complete gitk 'p/*/`bash ${__git_tcsh_completion_script} "${COMMAND_LINE}" |
sort | uniq`/'
+
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
