All, I have been having some trouble with CD burning. I upgraded to the 2.6 kernel hoping that that would fix the problem, but alas, it has only gotten worse. When I boot my system, everything works fine. I can do a cdrecord -scanbus and my cd burner shows up on 0,0,0. I can even burn 1 CD. The problem is that either while or just after fixating the disk, something goes horribly, horribly wrong.... The CD burner appears to disappear, and I have to reboot to get it back. Has anyone else seen anything like this? I have added the output from cdrecord, syslog, and dmesg below.
TIA, Kenny Average write speed 7.8x. Min drive buffer fill was 99% Fixating... cdrecord: No such device or address. Cannot send SCSI cmd via ioctl cdrecord: No such device or address. Cannot send SCSI cmd via ioctl cdrecord: No such device or address. Cannot send SCSI cmd via ioctl cdrecord: No such device or address. Cannot send SCSI cmd via ioctl cdrecord: No such device or address. Cannot send SCSI cmd via ioctl cdrecord: No such device or address. Cannot send SCSI cmd via ioctl cdrecord: No such device or address. Cannot send SCSI cmd via ioctl and in syslog I get: Sep 7 09:28:18 Metatron kernel: sr0: CDROM not ready. Make sure there is a disc in the drive. Sep 7 09:28:49 Metatron last message repeated 62 times Sep 7 09:29:50 Metatron last message repeated 122 times Sep 7 09:30:40 Metatron last message repeated 101 times Sep 7 09:31:19 Metatron kernel: hdc: lost interrupt Sep 7 09:31:19 Metatron kernel: ide-scsi: No active request in idescsi_eh_reset Sep 7 09:31:19 Metatron kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 8 lun 0 Sep 7 09:31:19 Metatron kernel: SCSI error: host 0 id 8 lun 0 return code = 6000000 Sep 7 09:31:19 Metatron kernel: ^ISense class 0, sense error 0, extended sense 0 and in dmesg: sr0: CDROM not ready. Make sure there is a disc in the drive. hdc: lost interrupt ide-scsi: No active request in idescsi_eh_reset scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 8 lun 0 SCSI error: host 0 id 8 lun 0 return code = 6000000 Sense class 0, sense error 0, extended sense 0 -- Kenneth E. Lussier <[EMAIL PROTECTED]>
signature.asc
Description: This is a digitally signed message part