On Tue, 31 Oct 2006 22:19:18 +0100, Michael Prokop wrote: >> % /etc/init.d/bind9 restart >> Stopping domain name service...: bindrndc: connection to remote host closed >> This may indicate that the remote server is using an older version of >> the command protocol, this host is not authorized to connect, >> or the key is invalid. >> failed! >> Starting domain name service...: bind failed! > >> What could be wrong? > > Take a look at the syslog.
Oct 31 18:34:56 cxmr named[2554]: invalid command from 127.0.0.1#42763: bad auth nothing else. Hmm... let's see: There is still an old bind running: bind 2554 1 0 Oct28 ? 00:00:00 /usr/sbin/named -u bind Having killed it by 'kill 2554', I am able to start bind again, but with a little glitch: % /etc/init.d/bind9 restart Stopping domain name service...: bindrndc: connect failed: connection refused failed! Starting domain name service...: bind. bind 3146 1 0 18:38 ? 00:00:00 /usr/sbin/named -u bind The syslog seems to be normal though: Oct 31 18:38:30 cxmr named[3146]: starting BIND 9.3.2-P1 -u bind Oct 31 18:38:30 cxmr named[3146]: found 1 CPU, using 1 worker thread Oct 31 18:38:30 cxmr named[3146]: loading configuration from '/etc/bind/named.conf' Oct 31 18:38:30 cxmr modprobe: WARNING: Not loading blacklisted module ipv6 Oct 31 18:38:30 cxmr named[3146]: no IPv6 interfaces found Oct 31 18:38:30 cxmr named[3146]: listening on IPv4 interface lo, 127.0.0.1#53 Oct 31 18:38:30 cxmr named[3146]: listening on IPv4 interface eth0, 192.168.2.100#53 Oct 31 18:38:30 cxmr named[3146]: command channel listening on 127.0.0.1#953 Oct 31 18:38:30 cxmr named[3146]: zone 0.in-addr.arpa/IN: loaded serial 1 Oct 31 18:38:30 cxmr named[3146]: zone 127.in-addr.arpa/IN: loaded serial 1 Oct 31 18:38:30 cxmr named[3146]: zone 255.in-addr.arpa/IN: loaded serial 1 Oct 31 18:38:30 cxmr named[3146]: zone localhost/IN: loaded serial 1 Oct 31 18:38:30 cxmr named[3146]: running If I restart it again, I get back the same error: % /etc/init.d/bind9 restart Stopping domain name service...: bindrndc: connection to remote host closed This may indicate that the remote server is using an older version of the command protocol, this host is not authorized to connect, or the key is invalid. failed! Starting domain name service...: bind failed! The syslog has the same message: Oct 31 18:39:41 cxmr named[3146]: invalid command from 127.0.0.1#40741: bad auth Ok, it is not that bad -- my named can be started, but not restarted. Any explanation? thanks -- Tong (remove underscore(s) to reply) http://xpt.sourceforge.net/ _______________________________________________ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/