You're most welcome, Chris. "You can't depend on your eyes, if your imagination is out of focus".
>________________________________ > From: CHRIS COFFELT <chrisonline...@yahoo.com> >To: "HPDesignJet_Printers@yahoogroups.com" ><HPDesignJet_Printers@yahoogroups.com> >Sent: Monday, April 15, 2013 10:50 PM >Subject: Re: [HPDesignJet_Printers] Can someone suggest how to fix this problem > > > > >Thanks alot Teddy > > >From: Teddy Dako <teddyd...@yahoo.com> >To: "HPDesignJet_Printers@yahoogroups.com" ><HPDesignJet_Printers@yahoogroups.com> >Sent: Monday, April 15, 2013 1:40 PM >Subject: Re: [HPDesignJet_Printers] Can someone suggest how to fix this problem > > >OK. If it is in the Roll slot and there is no misaligned sheet on the display, >it is possible the media sensor is faulty. You could try removing the cleanout >and putting it back. If that doesn't help, you might need to have the media >sensor checked. Depending on how handy you are, you could do it yourself. On >the media sensor, there are two kind of LED thingys. These might just need >cleaning. > >"You can't depend on your eyes, if your imagination is out of focus". >From: CHRIS COFFELT <chrisonline...@yahoo.com> >>To: "HPDesignJet_Printers@yahoogroups.com" >><HPDesignJet_Printers@yahoogroups.com> >>Sent: Monday, April 15, 2013 10:37 PM >>Subject: Re: [HPDesignJet_Printers] Can someone suggest how to fix this >>problem >> >> >>I will check the display. I was loading it in the roll slot. >> >> >>From: Teddy Dako <teddyd...@yahoo.com> >>To: "HPDesignJet_Printers@yahoogroups.com" >><HPDesignJet_Printers@yahoogroups.com> >>Sent: Monday, April 15, 2013 1:27 PM >>Subject: Re: [HPDesignJet_Printers] Can someone suggest how to fix this >>problem >> >> >>Also, in which of the two slots are you loading the roll? One is for cut >>sheet, the other is for the roll. >> >>"You can't depend on your eyes, if your imagination is out of focus". >>From: CHRIS COFFELT <chrisonline...@yahoo.com> >>>To: "HPDesignJet_Printers@yahoogroups.com" >>><HPDesignJet_Printers@yahoogroups.com> >>>Sent: Monday, April 15, 2013 9:51 PM >>>Subject: [HPDesignJet_Printers] Can someone suggest how to fix this problem >>> >>> >>>I do not print much. My designjet 130 nr will not load rolled paper. It >>>starts to take it, goes in a couple of inches and then kicks it out. I even >>>bought a new roll and it does the same thing. Any suggestions? Please >>>email me at chrisonline...@yahoo.com >>> >>>Chris > > >