Pak Nardipta, Alternatif lainnya adalah PT. Salsabila Rizky Pratama, dengan pak Urpan Dani atau staf-nya. Setelah ini saya akan berikan kontak detilnya, silakan berhubungan langsung.
Salam, Syaiful On Thu, Mar 28, 2013 at 6:43 PM, <nardipt...@gmail.com> wrote: > ** > Thanks Pak Luhkito, > > Nanti saya coba kontak mas Revkinya. > > Semakin bnyak referensi, memudahkan kita cari barang. > > Trims, > > > Np > Powered by Telkomsel BlackBerry® > ------------------------------ > *From: * Luhkito Hadisoemarto <lkt...@gmail.com> > *Sender: * <iagi-net@iagi.or.id> > *Date: *Thu, 28 Mar 2013 17:44:32 +0700 > *To: *<iagi-net@iagi.or.id> > *ReplyTo: * iagi-net@iagi.or.id > *Subject: *Re: [iagi-net] CMC HV Drilling Mud > > Sama-sama Pak, saya sudah kontak ke PT tersebut yang kebetulan 1 kota > dengan saya, saya sudah bicara dengan Marketing Officernya, Namanya Pak > Revki (HP : 08182229090), info sementara barang tersedia, dengan harga per > bag (25kg) = 51 USD. Silahkan dihubungi langsung dulu mumpung masih anget. > Saya sudah bilang kalau Pak Nardipta akan menghubungi Pak Revki. > > Salam, > > *Luhkito Hadisoemarto* > 087718200048 > > On Thu, Mar 28, 2013 at 5:24 PM, nardipta pratama <nardipt...@gmail.com>wrote: > >> Pak Luhkito, >> >> Terimakasih untuk sharingnya. Really appreciated. >> >> Jika ada di tempat lain selain balikpapan dan surabaya , boleh juga . >> Saya sedang survey dahulu, supaya suatu saat jika kekurangan ada beberapa >> cadangan. >> >> Mohon dishare jika ada daerah lain yg menyediakan ini. >> >> Terimakasih >> >> NP >> >> On Thu, Mar 28, 2013 at 6:16 PM, Luhkito Hadisoemarto >> <lkt...@gmail.com>wrote: >> >>> Pak Nardipta, >>> >>> Saya dapat info yang dicari mungkin cocok dengan yang diperlukan, >>> agennya ada di Bandung Juga : >>> >>> *PT. BINTANG TIARA INDONESIA* >>> >>> *Agen ** **drilling mud (CMC HV = Chemical High Viscosity) di Indonesia >>> *** >>> >>> * * >>> >>> *DESCRIPTION* >>> >>> CMC-HV is a technical grade sodium carboxymethylcullulose, a long chain >>> colloid used in water base mud system to develop viscosity and/or water >>> loss control. It is a powder which is easily dispersible into the drilling >>> fluid system. >>> >>> CMC ia available in two viscosity ranges: low viscosity (LV) and high >>> viscosity (HV). The low viscosity product, CMC-LV meets OCMA Specification >>> DFCP-2, as well as all API Specification 13 requirements as a CMC filtrate >>> reducing agent. CMC-HV exceed OCMA Specification DFCP-7, as well as all API >>> Specification 13 requirements for high viscosity CMC as a filtrate reducing >>> agent. CMC-HV meets OCMA Specification DFCP-7 as a thickening agent for >>> water base mud systems. >>> >>> >>> >>> *APPLICATION* >>> >>> CMC is an effective fluid loss control agent in most water base mud >>> systems, including systems of sea or salt water as the makeup fluid. CMC-LV >>> perform this function without imparting additional viscosity to the system >>> whereas CMC-HV performs the function while imparting viscosity. >>> >>> CMC is relatively stable to temperatures of 300 oF (148.8 oC) and is not >>> readily subject to fermentation. >>> >>> >>> >>> *RECOMMENDED TREATMENT* >>> >>> For fluid loss control in sea and salt muds concentrations of between >>> 0.5 to 2 ppb (1.42 to 5.7 kg/m3) of CMC-LV is recommended. >>> >>> For viscosity development a concentration of between 0.5 to 3.0 ppb (1.4 >>> to 8.6 kg/m3) of CMC-HV is recommended. >>> >>> A Messina engneer is available for consultation regarding the use of two >>> product grades, CMC-LV and CMC-HV best suited to meet the requirements of >>> the operator or the drilling situation. >>> >>> >>> *PACKAGING* >>> >>> CMC is normally packaged in 25 kg export paperbags. Special packaging, >>> such as a woven polyprolylene outer bag, palletization, wrapping and >>> strapping is available on request. >>> >>> >>> Saya temukan agennya kata Mbah Google di sini : >>> >>> >>> >>> *P.T. BINTANG TIARA CITRA INDONESIA** >>> Jl. Ciganitri Raya No.7 >>> Bandung 40287 - Jawa Barat - Indonesia >>> Tel. 62 22 7500 835 >>> Fax. 62 22 7500 863 >>> Email : bis...@bintangtiaracitra.com >>> http://www.bintangtiaracitra.com <http://bintangtiaracitra.com/>* >>> >>> Salam, >>> >>> Luhkito Hs. >>> www.positionconsultant.com >>> >>> 2013/3/28 nardipta pratama <nardipt...@gmail.com> >>> >>>> >>>> Salam Hormat Rekan2x IAGI, >>>> >>>> >>>> Saya sekarang ini sedang mencari informasi toko di Balikpapan dan >>>> Surabaya yang menjual drilling mud (CMC HV = Chemical High Viscosity). >>>> Drilling Mud ini dipakai untuk pelaksanaan pemboran geoteknik. >>>> Spesifikasinya seperti dibawah ini: >>>> >>>> >>>> >>>> *API 13A Specification* >>>> >>>> *CMC HV* >>>> >>>> Dial Reading at 600rpm,**** >>>> >>>> Fann 35 viscometer**** >>>> >>>> Filtrate Volume, ml**** >>>> >>>> -In de-ionized Water:30 min.**** >>>> >>>> -In 40g/l salt water:30 min**** >>>> >>>> -In saturated salt water: 30 min**** >>>> >>>> 10 max >>>> <i...@duta-marine.com> >>>> >>>> Saya sudah check scomi website dan di internet , tapi belum dapat >>>> informasi toko dan harga. >>>> >>>> Mungkin drilling Mud ini juga biasa digunakan untuk explorasi migas >>>> pada RIG Jack up or platform. Biasanya Mud / drilling Engineer tahu ttg hal >>>> ini. >>>> >>>> Jika rekan 2x ada informasi mengenai toko yg jual CMC HV drilling mud >>>> di Balikpapan dan Surabaya, appreciated jika dishare ke saya. >>>> Terima kasih dan salam, >>>> Nardipta >>>> **** >>>> >>>> **** >>>> >>>> >>> >> > -- Mohammad Syaiful - Explorationist, Consultant Geologist Mobile: 62-812-9372808 Emails: msyai...@etti.co.id (business) mohammadsyai...@gmail.com President Director of Exploration Think Tank Indonesia (ETTI)
