Howard, OK, so you have all your maintenance. Good, make sure it is all received. Now, go to IBMLINK, and pull the PSP bucket( term for a document that lists required maintenance) for that device type. In it, it will have a list of all the required PTF's for that hardware. Take that list, and build your SMPE apply(check) with that list. Set it for GROUPEXTEND(YES), this should pick up the missing sysmods(assuming they were ordered) and see what happens. The PSP bucket is the 'bible' so to speak for anything related to that device. Regarding service for all your software, you can run a SMPE maintenance utility that will create a binary file of all your products/maintenance, and upload that to the ShopZseries site. Once done, then you can order all maintenance for all products based on your current environment.
-or- Take the scatter gun effect, and apply all the maintenance you received and hope that you have ordered everything you needed. If it were me, I'd take the first route. Dave ________________________________________________________ Dave Jousma Principal Systems Programmer [EMAIL PROTECTED] 616.653.8429 -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Howard Rifkind Sent: Tuesday, April 25, 2006 1:43 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: SMPE Apply Question. Thank David. I've aleady done this...got cum tapes, RSU tapes.etc. I think IBM is giving me the run around on this one. I'll check back with them. Problem is I need all service relaive to all the software on my machine and I some how can't seem to get that. During the apply there are still a whole bunch of missing sysmods. Thanks. This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html