Further to my previous message, the exact output is:
### Making all in
/messaging/richard2/builds/new-imap/cyrus-imapd-2.0.12/perl/imap
cc -c -I../../lib -I/usr/local/include -fprm d -ieee -std -DLANGUAGE_C
-O4 -DVERSION=\"1.00\" -DXS_VERSION=\"1.00\"
-I/usr/lib/perl-5.005/lib/5.00503/alpha-dec_osf/CORE -DPERL_POLLUTE
IMAP.c
cc: Warning: IMAP.xs, line 492: In this statement, the referenced type
of the pointer value
"(pcb==&PL_sv_undef?imclient_xs_fcmdcb:imclient_xs_cb)" is "function
(pointer to struct imclient, pointer to struct xsccb, pointer to struct
imclient_reply) returning void", which is not compatible with "function
(pointer to struct imclient, pointer to void, pointer to struct
imclient_reply) returning void". (ptrmismatch)
(pcb == &sv_undef ?
----------------------^
Running Mkbootstrap for Cyrus::IMAP ()
chmod 644 IMAP.bs
ar cr tmp.a IMAP.o ../../lib/libcyrus.a
: tmp.a
LD_RUN_PATH="/usr/local/lib" ld -o blib/arch/auto/Cyrus/IMAP/IMAP.so
-shared -expect_unresolved "*" -O4 -msym -s -all tmp.a -none
-L/usr/local/lib -lsasl
ld:
Object file format error in: tmp.a(libcyrus.a): read_cur_obj_info: bad
file magic number(0x3c21)
*** Exit 1
Stop.
*** Exit 1
Stop.
*** Exit 1
Stop.
Thanks,
Dave.
Scott Adkins wrote:
>
> --On Monday, March 05, 2001 10:44 AM +1000 David Richards
> <[EMAIL PROTECTED]> wrote:
>
> > I am having problems getting v2.0.12 to compile on Compaq Tru64 v5.1. I
> > have gone to quite extensive means to try and make it compile.
>
> Yes, I have had similar problems, but given time, I was able to work most
> of these out. I will try to help you as much as I can.
>
> > I searched the mail list archives and found a posting from Ron Roskens
> > on 3 Jun, 2000 which suggested something like:
> >
> > [CONFIGURATION STUFF DELETED]
> >
>
> First, I created a RUNME script that contained all the necessary stuff.
> It even saves the output to a file for later reference. The most important
> aspect of the script is that it does set the environment properly to detect
> the BerkeleyDB library, and it sets the necessary compile time flags to
> make sure the executable can find the libraries at run-time.
>
> Without further ado, here is the script:
>
> #!/bin/ksh
>
> LOCAL="/usr/local"
> BERKELEY="/usr/local/BerkeleyDB.3.2"
>
> rm -f config.status config.log
> rm -f configure.output make.output
>
> export CC=cc
> export CFLAGS="-g -I$LOCAL/include -I$BERKELEY/include"
> export LDFLAGS="-lpthread -L$LOCAL/lib -Wl,-rpath,$LOCAL/lib \
> -L$BERKELEY/lib -Wl,-rpath,$BERKELEY/lib"
>
> ./configure --with-dbdir=$BERKELEY \
> --with-openssl=/usr/local/ssl \
> --with-sasl=/usr/local \
> --disable-sieve \
> --without-agentx \
> --without-zephyr \
> | tee configure.output
>
> > Then I edited the 'imap/Makefile' and added to the DEPLIBS variable the
> > value '/usr/local/BerkeleyDB.3.0/lib/libdb.a' then the thing actually
> > compiled. But I got the error:
>
> With the above configuration, you shouldn't have to do this... in fact,
> I would start over with freshly unpackaged sources. By the way, I noticed
> you were using "--with-sasldir" instead of "--with-sasl". The sasldir
> one does not exist in 2.0.12 from what I can see with configuration help.
> From the help, the following is listed:
>
> --with-sasl=DIR Compile with libsasl in <DIR>
>
> > Don't know how to make 'BUILTSOURCES'
>
> This one is easy. Edit imap/Makefile.in and go to line 114, which is the
> PROGS section. You will see the following for the PROGS section, as well
> as the following BUILTSOURCES section:
>
> PROGS = imapd lmtpd pop3d \
> fud reconstruct quota \
> mbpath ipurge deliver \
> ctl_mboxlist ctl_deliver \
> @IMAP_PROGS@
>
> BUILTSOURCES = imap_err.h pushstats.h lmtpstats.h
>
> The problem is that @IMAP_PROGS@ is empty after configuration, which means
> the line turns into a blank line. The Make program on Compaq simply sees
> something like the following:
>
> ctl_mboxlist ctl_deliver \
>
> BUILTSOURCES = imap_err.h pushstats.h lmtpstats.h
>
> This makes the BUILTSOURCES section look like it is part of the PROGS
> section, which is not even in a correct Makefile format. In any the case,
> it causes an error.
>
> The solution is to combine @IMAP_PROGS@ with the previous line and remove
> the backslash:
>
> PROGS = imapd lmtpd pop3d \
> fud reconstruct quota \
> mbpath ipurge deliver \
> ctl_mboxlist ctl_deliver @IMAP_PROGS@
>
> BUILTSOURCES = imap_err.h pushstats.h lmtpstats.h
>
> Since this is done in Makefile.in, it will persist through all your
> configuration runs (since Makefile will be created properly). I will be
> sending in a patch to fix this issue. Some "makes" handle this better
> than others... but it doesn't hurt to do the above to make it work with
> them all.
>
> > So, I gave up. To me it seems like a problem with the Compaq linker
> > 'ld'. I am off to install gcc and see how that goes, I will respond to
> > this posting (for archives sake) to say what happens. In the meantime,
> > if anyone has any pointers for me could you please let me know.
>
> My suggestion is to try the above recipe using CC and not GCC. CC will
> produce much better code on Compaq than what GCC will. Also, I recommend
> moving to BerkeleyDB 3.2 or something higher than 3.0. Of course, if you
> are simply upgrading your IMAP server, you may be commited to 3.0 and may
> not want to upgrade your databases, but still, I recommend upgrading.
>
> Incidentally, the above recipe works fine on 5.0a. I haven't had the
> opportunity to try it on 5.1 yet, but I know I will be in the near future.
>
> Good luck!
> Scott
> --
> +-=-=-=-=-=-=-=-=-=+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+=-=-=-=-=-=-=-=-+
> Scott W. Adkins http://www.cns.ohiou.edu/~sadkins/
> UNIX Systems Engineer mailto:[EMAIL PROTECTED]
> ICQ 7626282 Work (740)593-9478 Fax (740)593-1944
> +-=-=-=-=-=-=-=-=-=+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+=-=-=-=-=-=-=-=-+
> CNS, HDL Center, Suite 301, Ohio University, Athens, OH 45701-2979
--
David Richards
Project Manager (Messaging)
Information Technology Services
Queensland University of Technology
