On Tue, Mar 12, 2024 at 09:48:33PM -0700, Manasi Navare wrote:
> Now when we enable bigjoiner for MST, in MST case
> intel_ddi_post_disable_hdmi_or_sst() function wont get called,
> Do we need similar changes for MST case to loop over the joined pipes
> in MST bigjoiner case?
>
> Manasi
Hi Manasi, check now my latest series, that should handle this.
Stan
>
> On Fri, Mar 8, 2024 at 5:12 AM Stanislav Lisovskiy
> <stanislav.lisovs...@intel.com> wrote:
> >
> > From: Vidya Srinivas <vidya.srini...@intel.com>
> >
> > We need bigjoiner support with MST functionality
> > for MST monitor resolutions > 5K to work.
> > Adding support for the same.
> >
> > v2: Addressed review comments from Jani.
> > Revert rejection of MST bigjoiner modes and add
> > functionality
> >
> > v3: Fixed pipe_mismatch WARN for mst_master_transcoder
> > Credits-to: Manasi Navare <navareman...@chromium.org>
> >
> > Signed-off-by: Vidya Srinivas <vidya.srini...@intel.com>
> > Reviewed-by: Manasi Navare <navareman...@chromium.org>
> > ---
> > drivers/gpu/drm/i915/display/intel_ddi.c | 6 ++++--
> > drivers/gpu/drm/i915/display/intel_dp_mst.c | 17 +++++++++--------
> > 2 files changed, 13 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index 3756975bd561c..3bf8941107473 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -3924,9 +3924,11 @@ static void intel_ddi_read_func_ctl(struct
> > intel_encoder *encoder,
> > pipe_config->lane_count =
> > ((temp & DDI_PORT_WIDTH_MASK) >>
> > DDI_PORT_WIDTH_SHIFT) + 1;
> >
> > - if (DISPLAY_VER(dev_priv) >= 12)
> > - pipe_config->mst_master_transcoder =
> > + if (DISPLAY_VER(dev_priv) >= 12) {
> > + if (!intel_crtc_is_bigjoiner_slave(pipe_config))
> > + pipe_config->mst_master_transcoder =
> >
> > REG_FIELD_GET(TRANS_DDI_MST_TRANSPORT_SELECT_MASK, temp);
> > + }
> >
> > intel_cpu_transcoder_get_m1_n1(crtc, cpu_transcoder,
> > &pipe_config->dp_m_n);
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > index 53aec023ce92f..3e6e2cd08d3ab 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > @@ -525,6 +525,7 @@ static int intel_dp_mst_compute_config(struct
> > intel_encoder *encoder,
> > {
> > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > struct intel_atomic_state *state =
> > to_intel_atomic_state(conn_state->state);
> > + struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
> > struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
> > struct intel_dp *intel_dp = &intel_mst->primary->dp;
> > const struct intel_connector *connector =
> > @@ -542,6 +543,10 @@ static int intel_dp_mst_compute_config(struct
> > intel_encoder *encoder,
> > if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
> > return -EINVAL;
> >
> > + if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay,
> > + adjusted_mode->crtc_clock))
> > + pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1,
> > crtc->pipe);
> > +
> > pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
> > pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> > pipe_config->has_pch_encoder = false;
> > @@ -1330,12 +1335,6 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector
> > *connector,
> > * corresponding link capabilities of the sink) in case the
> > * stream is uncompressed for it by the last branch device.
> > */
> > - if (mode_rate > max_rate || mode->clock > max_dotclk ||
> > - drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) >
> > port->full_pbn) {
> > - *status = MODE_CLOCK_HIGH;
> > - return 0;
> > - }
> > -
> > if (mode->clock < 10000) {
> > *status = MODE_CLOCK_LOW;
> > return 0;
> > @@ -1349,8 +1348,10 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector
> > *connector,
> > if (intel_dp_need_bigjoiner(intel_dp, mode->hdisplay,
> > target_clock)) {
> > bigjoiner = true;
> > max_dotclk *= 2;
> > + }
> >
> > - /* TODO: add support for bigjoiner */
> > + if (mode_rate > max_rate || mode->clock > max_dotclk ||
> > + drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) >
> > port->full_pbn) {
> > *status = MODE_CLOCK_HIGH;
> > return 0;
> > }
> > @@ -1397,7 +1398,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector
> > *connector,
> > return 0;
> > }
> >
> > - *status = intel_mode_valid_max_plane_size(dev_priv, mode, false);
> > + *status = intel_mode_valid_max_plane_size(dev_priv, mode,
> > bigjoiner);
> > return 0;
> > }
> >
> > --
> > 2.37.3
> >
