From: Daniel Vetter <daniel.vet...@ffwll.ch>
Luckily the bit definitions match, but it's still confusing
to use one when handling the other. So sprinkle some OCD over
the #defines to make them match and use the right version in
each place.
Maybe we should unify these definitions completely, but that
can always be done sometime in the future.
Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch>
Reviewed-by: Paulo Zanoni <paulo.r.zan...@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 7 ++++---
drivers/gpu/drm/i915/intel_ddi.c | 12 ++++++------
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3488567..5db1959 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5900,9 +5900,10 @@ enum punit_power_well {
#define WRPLL_CTL1 0x46040
#define WRPLL_CTL2 0x46060
#define WRPLL_PLL_ENABLE (1<<31)
-#define WRPLL_PLL_SELECT_SSC (0x01<<28)
-#define WRPLL_PLL_SELECT_NON_SSC (0x02<<28)
-#define WRPLL_PLL_SELECT_LCPLL_2700 (0x03<<28)
+#define WRPLL_PLL_SSC (1<<28)
+#define WRPLL_PLL_NON_SSC (2<<28)
+#define WRPLL_PLL_LCPLL (3<<28)
+#define WRPLL_PLL_REF_MASK (3<<28)
/* WRPLL divider programming */
#define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0)
#define WRPLL_DIVIDER_REF_MASK (0xff)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 9f02281..16c9163 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -588,9 +588,9 @@ static int intel_ddi_calc_wrpll_link(struct
drm_i915_private *dev_priv,
u32 wrpll;
wrpll = I915_READ(reg);
- switch (wrpll & SPLL_PLL_REF_MASK) {
- case SPLL_PLL_SSC:
- case SPLL_PLL_NON_SSC:
+ switch (wrpll & WRPLL_PLL_REF_MASK) {
+ case WRPLL_PLL_SSC:
+ case WRPLL_PLL_NON_SSC:
/*
* We could calculate spread here, but our checking
* code only cares about 5% accuracy, and spread is a max of
@@ -598,7 +598,7 @@ static int intel_ddi_calc_wrpll_link(struct
drm_i915_private *dev_priv,
*/
refclk = 135;
break;
- case SPLL_PLL_LCPLL:
+ case WRPLL_PLL_LCPLL:
refclk = LC_FREQ;
break;
default:
@@ -780,7 +780,7 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
intel_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p);
- val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 |
+ val = WRPLL_PLL_ENABLE | WRPLL_PLL_LCPLL |
WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) |
WRPLL_DIVIDER_POST(p);
@@ -879,7 +879,7 @@ void intel_ddi_pll_enable(struct intel_crtc *crtc)
intel_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p);
- new_val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 |
+ new_val = WRPLL_PLL_ENABLE | WRPLL_PLL_LCPLL |
WRPLL_DIVIDER_REFERENCE(r2) |
WRPLL_DIVIDER_FEEDBACK(n2) | WRPLL_DIVIDER_POST(p);
--
1.8.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
